[x3d-public] Interesting Example

[John Carlson]

Ah, yeah I don't know what I would do with both set_axis and axis.
On Jun 17, 2016 11:07 AM, "Roy Walmsley" <roy.walmsley at ntlworld.com> wrote:

> Thanks for the validation, Don. I can confirm the functionality you
> observed
> for BS Contact, Instant Reality and Xj3D. My own viewer is good
> (notwithstanding some coding errors!).
>
> I have a further observation on the file "Rotor.x3d". In particular, the
> Script node with the DEF name "Rotor", starting at line 49. Notice that
> there are five field definitions.
>
> The first field definition has the name "set_axis", and the access type
> inputOnly. The third field definition has the name "axis", and the access
> type inputOutput. What would happen if the file contained a subsequent
> ROUTE
> statement, connecting to the node "Rotor" and field "set_axis"? Which field
> will it connect to? It could be either? So is this situation permitted?
> And,
> if not, should the Schematron be updated to check for it?
>
> Roy
>
> -----Original Message-----
> From: Don Brutzman [mailto:brutzman at nps.edu]
> Sent: 17 June 2016 15:17
> To: Roy Walmsley; John Carlson
> Cc: Holger Seelig; x3d-public at web3d.org
> Subject: Re: Interesting Example
>
> Yes, interesting.  Test report follows.
>
> On 6/17/2016 3:32 AM, Roy Walmsley wrote:
> > Hi,
> >
> > I have come across an interesting example, relating to the use of
> Scripts/Prototypes.
> >
> > It is on the Cobweb site at http://titania.create3000.de/cobweb/. Scroll
> down to examples, navigate to Page 3 of the Examples list, and choose
> "Gears".
> >
> > This example is also available on Holger's GitHub site at
> https://github.com/create3000/Library/tree/master/Examples/Gears. There
> are
> four files, of which two are XML encoded X3D. The file Rotor.x3d supplies a
> prototype declaration that is used within gears.x3d.
> >
> > Try opening the file gears.x3d in different browsers!
>
> Success: InstantReality, Octaga
> Partial success: BS Contact Geo (animates OK but problem with red gear
> geometry), FreeWrl (problems with geometry) Load errors: Xj3D (dislikes
> Full
> profile), view3dscene, H3DViewer
>
> X3D Validator reports the following issues with these 2 scenes:
> ===============================================================
> --------- Commence validation checks for Rotor.x3d ---------
>
> Performing well-formed XML check...
> Checking file:/C:/Users/don/Desktop/Rotor.x3d...
> Well-formed XML check: pass
>
> Performing DOCTYPE check...
> [X3dDoctypeChecker] success: valid XML declaration found; success: final
> X3D
> 3.3 DOCTYPE found.
>
> Performing DTD validation...
> Checking file:/C:/Users/don/Desktop/Rotor.x3d...
> XML DTD validation: pass
>
> Performing X3D schema validation...
> Checking file:/C:/Users/don/Desktop/Rotor.x3d...
> Referenced entity at
> "nbres:/org/web3d/x3d/externals/schemas/x3d-3.3-Web3dExtensionsPublic.xsd".
> XML schema validation: pass
>
> Performing X3D regular expression (regex) values check...
>
> Performing X3dToClassicVrml.xslt conversion check...
>
> Performing X3D Schematron check...
> <X3D profile='Full'> is defined, but nodes in scene have actual
> profile='Immersive' [/X3D, info] Missing X3D filename in meta tag, should
> appear as <meta name='title' content='FileName.x3d'/> [/X3D/head, warning]
> url for X3D file should appear in <meta name='identifier'
> content='http://someAddress/somePath/FileName.x3d'/> [/X3D/head, warning]
> Missing X3D scene description in meta tag, should appear as <meta
> name='description' content='topic sentence plus good summary'/> [/X3D/head,
> info] <ProtoInterface name='' DEF=''> <field name='angle' value=''/> field
> declaration is missing initialization value
> [/X3D/Scene/ProtoDeclare/ProtoInterface/field[4], error] <ProtoInterface
> name='' DEF=''> <field name='loop' value=''/> SFBool field must have
> value='true' or value='false'
> [/X3D/Scene/ProtoDeclare/ProtoInterface/field[5], error] <ProtoInterface
> name='' DEF=''> <field name='startTime' value=''/> field declaration is
> missing initialization value
> [/X3D/Scene/ProtoDeclare/ProtoInterface/field[6], error] <ProtoInterface
> name='' DEF=''> <field name='pauseTime' value=''/> field declaration is
> missing initialization value
> [/X3D/Scene/ProtoDeclare/ProtoInterface/field[7], error] <ProtoInterface
> name='' DEF=''> <field name='resumeTime' value=''/> field declaration is
> missing initialization value
> [/X3D/Scene/ProtoDeclare/ProtoInterface/field[8], error] <ProtoInterface
> name='' DEF=''> <field name='stopTime' value=''/> field declaration is
> missing initialization value
> [/X3D/Scene/ProtoDeclare/ProtoInterface/field[9], error] <Script
> DEF='Rotor'/> contained source block must start with 'ecmascript:' rather
> than 'vrmlscript:'[/X3D/Scene/ProtoDeclare/ProtoBody/Script, error] <Script
> DEF='Rotor'/> contained CDATA source block must start with
> 'ecmascript:'[/X3D/Scene/ProtoDeclare/ProtoBody/Script, error] <Script
> DEF='Rotor'> <field name='axis' accessType='inputOutput'/> does not send
> output event via assignment statement axis=___;
> [/X3D/Scene/ProtoDeclare/ProtoBody/Script/field[3], warning] <Script
> DEF='Rotor'> <field name='angle' accessType='inputOutput'/> does not send
> output event via assignment statement angle=___;
> [/X3D/Scene/ProtoDeclare/ProtoBody/Script/field[4], warning]
>
> --------- Validation checks complete for Rotor.x3d ---------
>
> --------- Commence validation checks for gears.x3d ---------
>
> Performing well-formed XML check...
> Checking file:/C:/Users/don/Desktop/gears.x3d...
> Well-formed XML check: pass
>
> Performing DOCTYPE check...
> [X3dDoctypeChecker] success: valid XML declaration found; success: final
> X3D
> 3.0 DOCTYPE found.
>
> Performing DTD validation...
> Checking file:/C:/Users/don/Desktop/gears.x3d...
> XML DTD validation: pass
>
> Performing X3D schema validation...
> Checking file:/C:/Users/don/Desktop/gears.x3d...
> XML schema validation: pass
>
> Performing X3D regular expression (regex) values check...
>
> Performing X3dToClassicVrml.xslt conversion check...
>
> Performing X3D Schematron check...
> <X3D profile='Full'> is defined, but nodes in scene have actual
> profile='Immersive' [/X3D, info] url for X3D file should appear in <meta
> name='identifier' content='http://someAddress/somePath/FileName.x3d'/>
> [/X3D/head, warning] Missing X3D scene description in meta tag, should
> appear as <meta name='description' content='topic sentence plus good
> summary'/> [/X3D/head, info] <ExternProtoDeclare name="Rotor"/> url array
> address(es) missing #Rotor appended [/X3D/Scene/ExternProtoDeclare,
> warning]
> <ExternProtoDeclare name="Rotor"/> url array address(es) missing online
> http
> references [/X3D/Scene/ExternProtoDeclare, info] <ProtoInterface name=''
> DEF=''> <field name='creaseAngle' value=''/> field declaration is missing
> initialization value [/X3D/Scene/ProtoDeclare/ProtoInterface/field[6],
> error] <Coordinate DEF=''/> contains no point data
> [/X3D/Scene/ProtoDeclare/ProtoBody/IndexedFaceSet/Coordinate, warning]
> <Script DEF=''/> contained source block must start with 'ecmascript:'
> rather
> than 'vrmlscript:'[/X3D/Scene/ProtoDeclare/ProtoBody/Script, error] <Script
> DEF=''/> contained CDATA source block must start with
> 'ecmascript:'[/X3D/Scene/ProtoDeclare/ProtoBody/Script, error] <Script
> DEF=''> <field name='teeth' accessType='inputOutput'/> must define function
> set_teeth (newValue) [/X3D/Scene/ProtoDeclare/ProtoBody/Script/field[1],
> error] <Script DEF=''> <field name='teeth' accessType='inputOutput'/> does
> not send output event via assignment statement teeth=___;
> [/X3D/Scene/ProtoDeclare/ProtoBody/Script/field[1], warning] <Script
> DEF=''>
> <field name='toothDepth' accessType='inputOutput'/> must define function
> set_toothDepth (newValue)
> [/X3D/Scene/ProtoDeclare/ProtoBody/Script/field[2], error] <Script DEF=''>
> <field name='toothDepth' accessType='inputOutput'/> does not send output
> event via assignment statement toothDepth=___;
> [/X3D/Scene/ProtoDeclare/ProtoBody/Script/field[2], warning] <Script
> DEF=''>
> <field name='innerRadius' accessType='inputOutput'/> must define function
> set_innerRadius (newValue)
> [/X3D/Scene/ProtoDeclare/ProtoBody/Script/field[3], error] <Script DEF=''>
> <field name='innerRadius' accessType='inputOutput'/> does not send output
> event via assignment statement innerRadius=___;
> [/X3D/Scene/ProtoDeclare/ProtoBody/Script/field[3], warning] <Script
> DEF=''>
> <field name='outerRadius' accessType='inputOutput'/> must define function
> set_outerRadius (newValue)
> [/X3D/Scene/ProtoDeclare/ProtoBody/Script/field[4], error] <Script DEF=''>
> <field name='outerRadius' accessType='inputOutput'/> does not send output
> event via assignment statement outerRadius=___;
> [/X3D/Scene/ProtoDeclare/ProtoBody/Script/field[4], warning] <Script
> DEF=''>
> <field name='width' accessType='inputOutput'/> must define function
> set_width (newValue) [/X3D/Scene/ProtoDeclare/ProtoBody/Script/field[5],
> error] <Script DEF=''> <field name='width' accessType='inputOutput'/> does
> not send output event via assignment statement width=___;
> [/X3D/Scene/ProtoDeclare/ProtoBody/Script/field[5], warning]
>
> --------- Validation checks complete for gears.x3d ---------
> ===============================================================
>
> > I don't know how you would get on with this one, John, in your prototype
> expander.
>
> wondering why?
>
> all the best, Don
> --
> Don Brutzman  Naval Postgraduate School, Code USW/Br
> brutzman at nps.edu
> Watkins 270,  MOVES Institute, Monterey CA 93943-5000 USA
> +1.831.656.2149
> X3D graphics, virtual worlds, navy robotics
> http://faculty.nps.edu/brutzman
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://web3d.org/pipermail/x3d-public_web3d.org/attachments/20160617/385d6a10/attachment.html>