Difference between revisions of "Comparison of X3D AR Proposals"
Line 150: | Line 150: | ||
<BlendMode srcFactor='src_alpha' destFactor='one_minus_src_alpha' color='1 1 1' colorTransparency='0' alphaFunc='none' alphaFuncValue='0' equation='none' logFeature='' /> | <BlendMode srcFactor='src_alpha' destFactor='one_minus_src_alpha' color='1 1 1' colorTransparency='0' alphaFunc='none' alphaFuncValue='0' equation='none' logFeature='' /> | ||
</pre> | </pre> | ||
+ | |||
+ | |||
+ | === 4.4 Discussion === | ||
+ | Proposal A suggests simpler way to provide a specific color keying function for textures, while C suggests a more generic functions that can achieve required function. Although, the current proposed nodes in proposal C misses certain features to fulfill color keying, therefore needs some modification. Again, the trade off between simplicity and flexibility/extensibility needs further discussion. | ||
+ | |||
Line 218: | Line 223: | ||
} | } | ||
</pre> | </pre> | ||
− | |||
=== 6.4 Discussion === | === 6.4 Discussion === | ||
Line 225: | Line 229: | ||
− | == 7. Retrieving camera calibration information == | + | == 7. Retrieving camera calibration (internal parameters) information == |
=== 7.1 Proposal A === | === 7.1 Proposal A === | ||
This proposal suggests using the same CameraSensor node, used for retrieving live video stream, for retrieving camera calibration information. As described in 2.1, the proposed CameraSensor node includes a ‘projmat’ field which represents the calibration information of the CameraSensor. | This proposal suggests using the same CameraSensor node, used for retrieving live video stream, for retrieving camera calibration information. As described in 2.1, the proposed CameraSensor node includes a ‘projmat’ field which represents the calibration information of the CameraSensor. | ||
+ | |||
+ | <pre> | ||
+ | CameraSensor:X3DDirectSensorNode {
| ||
+ | SFImage [out] value
| ||
+ | SFBool [out] on FALSE
| ||
+ | SFMatrix4f [out] projmat "1 0 0 0 … “
| ||
+ | SFBool [out] tracking FALSE
| ||
+ | SFVec3f [out] position
| ||
+ | SFRotation [out] orientation
| ||
+ | } | ||
+ | </pre> | ||
+ | |||
+ | |||
+ | === 7.3 Proposal C === | ||
+ | This proposal suggests using the same IOSensor node, used for retrieving images from camera sensor. Four fields (TrackedObject1Camera_PrincipalPoint, TrackedObject1Camera_FOV_horizontal, TrackedObject1Camera_FOV_vertical, TrackedObject1Camera_CAM_aspect) in this node provides the calibration information. | ||
+ | |||
+ | <pre> | ||
+ | <IOSensor DEF='VisionLib' type='VisionLib' configFile='TutorialMarkerTracking_OneMarker.pm'> | ||
+ | <field accessType='outputOnly' name='VideoSourceImage' type='SFImage'/> | ||
+ | <field accessType='outputOnly' name='TrackedObject1Camera_ModelView' type='SFMatrix4f'/> | ||
+ | <field accessType='outputOnly' name='TrackedObject1Camera_PrincipalPoint' type='SFVec2f'/> | ||
+ | <field accessType='outputOnly' name='TrackedObject1Camera_FOV_horizontal' type='SFFloat'/> | ||
+ | <field accessType='outputOnly' name='TrackedObject1Camera_FOV_vertical' type='SFFloat'/> | ||
+ | <field accessType='outputOnly' name='TrackedObject1Camera_CAM_aspect' type='SFFloat'/> | ||
+ | </IOSensor> | ||
+ | </pre> | ||
+ | |||
+ | === 7.4 Discussion === | ||
+ | Both proposals suggest reusing the node that is used for accessing a camera sensor, and using a dedicated field of that node for providing camera calibration information. While proposal A suggests to use projection matrix as a calibration information, C suggests using a set of parameters. The latter approach could be safer in terms of encapsulating the projection matrix of a viewpoint which could be implementation dependent based on what graphics API it is using. | ||
+ | |||
Line 257: | Line 291: | ||
</pre> | </pre> | ||
− | The new fields provide a more general camera model than the standard Viewpoint. The | + | The new fields provide a more general camera model than the standard Viewpoint. The "principalPoint" field defines the relative position of the principal point. If the principal point is not equal to zero, the viewing frustum parameters (left, right, top, bottom) are simply shifted in the camera's image plane. A value of x = 2 means the left value is equal to the default right value. A value of x = -2 means the right value is equal to default. If the principal point is not equal to zero, the "fieldOfView" value is not equal to the real field of view of the camera, otherwise it complies with the default settings. |
− | To extend this idea, the | + | To extend this idea, the "fovMode" defines whether the field of view is measured vertically, horizontally or in the smaller direction, which is important for correctly parameterizing the aforementioned cinematographic camera. |
− | The field ``aspect'' defines the aspect ratio for the viewing angle defined by the | + | The field ``aspect'' defines the aspect ratio for the viewing angle defined by the "fieldOfView" range. This setting is independent of the current aspect ratio of the window, but reflects the aspect ratio of the actual capturing device. This extension allows us to model cameras with a non-quadratic pixel format, i.e. it defines (width / height) of a pixel. |
− | In addition to the Viewpoint extension we include a new camera node named Viewfrustum. This node has the two input/output fields | + | In addition to the Viewpoint extension we include a new camera node named Viewfrustum. This node has the two input/output fields "modelview" and "projection" of type SFMatrix4f. With the Viewfrustum node we are able to define a camera position and projection utilizing a standard projection/ modelview matrix pair. |
<pre> | <pre> | ||
Line 271: | Line 305: | ||
} | } | ||
</pre> | </pre> | ||
+ | |||
Line 288: | Line 323: | ||
See http://www.web3d.org/x3d/wiki/index.php/X3D_and_Augmented_Reality | See http://www.web3d.org/x3d/wiki/index.php/X3D_and_Augmented_Reality | ||
+ | |||
+ | |||
+ | |||
+ | |||
+ | == 10. Conclusion == |
Revision as of 20:49, 24 January 2012
Contents
- 1 Comparison between existing proposals - Working Draft
- 1.1 1. Introduction
- 1.2 2. Using Live Video stream as a texture
- 1.3 3. Using Live Video stream as a background
- 1.4 4. Supporting color keying in texture
- 1.5 5. Retrieving tracking information
- 1.6 6. Using tracking information to change 3D scene
- 1.7 7. Retrieving camera calibration (internal parameters) information
- 1.8 8. Using calibration information to set properties of (virtual) camera
- 1.9 9. Specifying nodes as physical object representatives
- 1.10 10. Conclusion
Comparison between existing proposals - Working Draft
Augmented Reality Working Group Web3D Consortium
Jan 25, 2012
1. Introduction
This document compares the existing proposals for extending X3D to support augmented and mixed reality visualization. Three (?) main proposals are compared in terms of requirements – two from Korean Chapter (A, B) and one from Instant Reality (C).
2. Using Live Video stream as a texture
2.1 Proposal A
This proposal proposed a new sensor node, CameraSensor (previously named LiveCamera node), for retrieving live video data from a camera device, and then routing the video stream to a PixelTexture node. The X3D browser is in charge of implementing and handling devices and mapping the video data to the CameraSensor node inside the X3D scene. The video stream itself is provided as a value (SFImage) field of the node which is updated every frame by the browser implementation according to the camera data.
CameraSensor:X3DDirectSensorNode { SFImage [out] value SFBool [out] on FALSE SFMatrix4f [out] projmat "1 0 0 0 … “ SFBool [out] tracking FALSE SFVec3f [out] position SFRotation [out] orientation }
While this straight forward, routing SFImage values might lead to performance and implementation problem. As an alternative, the same proposal also proposed to extend the behavior of the existing MovieTexture node to support live video stream within the node. The proposed behavior X3D browser is to allow users to select a file or a camera device for the MovieTexture node in the scene, if the url field of the node is empty (or filled with special token values, such as ‘USER_CUSTOMIZED’).
<Appearance> <MovieTexture loop='true' url=''/> </Appearance>
While this approach avoids performance problems by not exposing SFImage fields updated in real-time, it lacks of supports for using live video stream data for other purposes, such as background. This is to be solved partially by adding a new node MovieBackground, which behaves similarly to the MovieTexture but uses the user selected movie file or live video stream from a camera for filling the background of the 3D scene.
2.2 Proposal B
The proposal from Gerard Kim, in Korea Chapter, proposed a new sensor node, , …
2.3 Proposal C
This proposal proposes a general purpose IOSensor node, which allows to access external devices (e.g., joysticks and cameras) inside the X3D scene.
<IOSensor system='auto' type='' name='' triggerName='Interaction' maxValuesPerTrigger='1' description='' enabled='TRUE' logFeature='' />
The camera sensor (including marker tracking) is loaded through an instance of IOSensor, by defining the type of the sensor and it's field.
<IOSensor DEF='VisionLib' type='VisionLib' configFile='TutorialMarkerTracking_OneMarker.pm'> <field accessType='outputOnly' name='VideoSourceImage' type='SFImage'/> <field accessType='outputOnly' name='TrackedObject1Camera_ModelView' type='SFMatrix4f'/> <field accessType='outputOnly' name='TrackedObject1Camera_PrincipalPoint' type='SFVec2f'/> <field accessType='outputOnly' name='TrackedObject1Camera_FOV_horizontal' type='SFFloat'/> <field accessType='outputOnly' name='TrackedObject1Camera_FOV_vertical' type='SFFloat'/> <field accessType='outputOnly' name='TrackedObject1Camera_CAM_aspect' type='SFFloat'/> </IOSensor>
Using the camera image for texture is nothing more than routing the VideoSourceImage field of the IOSensor node to a PixelTexture node.
2.4 Discussion
Proposal A and B proposes a new node, specific for a camera, while C proposes a more generic type of node to be applied for variety of sensors. The trade off between simplicity and flexibility/extensibility needs further discussion.
3. Using Live Video stream as a background
3.1 Proposal A
The proposal proposed a MovieBackground node, extended from Background node to support ‘liveSource’ field which is assigned with a CameraSensor node (as described in 2.1) from which the Background node receives the live video stream data. Once the ‘liveSource’ field is assigned with a validate CameraSensor node, the background image is updated according to the live video stream from the CameraSensor node, assigned. For other purpose of use, it could also have a url field on which general source of movie clip could be assigned an used as a background.
MovieBackground:X3DBackgroundNode { ... // same to the original Background node SFString [in] url SFNode [in] liveSource }
Similar to the case in 2.1, the proposal also suggests a different approach where the MovieBackground node doesn’t explicitly need a CameraSensor node, but to let the browser to ask the user to choose the movie source (including camera device) when the url field is left empty (or filled with special token values, such as ‘USER_CUSTOMIZED’).
3.3 Proposal C
This proposal deals this problem similar to the case for using the camera image for texture. It proposes a PolygonBackground node, which represents a background that renders a single polygon using the specified material. It allows for defining an aspect ratio of the background image that is independent of the actual window size. Different modes are possible to fit the image in the window (vertical or horizontal).
<PolygonBackground positions='0 0, 1 0, 1 1, 0 1' texCoords='0 0 0, 1 0 0, 1 1 0, 0 1 0' normalizedX='TRUE' normalizedY='TRUE' fixedImageSize='0,0' zoomFactor='1.0' tile='TRUE' doCleanup='TRUE' mode='VERTICAL' clearStencilBitplanes='-1' isDefault='FALSE' description='' triggerName='Synchronize' logFeature='' />
Using the proposed PolygonBackground node, the image from camera is simply routed to the texture used for the PolygonBackground node. The image assigned to the image outslot of the IOSensor is routed to the texture in the appearance of the PolygonBackground node.
<PolygonBackground fixedImageSize='640,480' mode='VERTICAL'> <Appearance> <PixelTexture DEF='tex' autoScale='false'/> <TextureTransform scale='1 -1'/> </Appearance> </PolygonBackground> <ROUTE fromNode='VisionLib' fromField='VideoSourceImage' toNode='tex' toField='image'/>
To make the polygon for the background fill the viewport, the PolygonBackground's field fixedImageSize is used for describing the aspect ratio of the image, and the mode field is set to "VERTICAL" or "HORIZONTAL" which describes the way the polygon fits the viewport.
3.4 Discussion
Proposal A proposes a dedicated node for movie backgrounds, while proposal C proposes a multi-purpose PolygonBackground node. While the later gives more flexibility, it requires details to be elaborated, compared to the former which is more simple. Again, the trade off between simplicity and flexibility/extensibility needs further discussion.
4. Supporting color keying in texture
4.1 Proposal A
This proposal proposed to add a ‘keyColor’ field to the MovieTexture node, which indicates the color expected to be rendered as transparent, in order to provide chroma key effect on the movie texture. The browser will be in charge of rendering the parts of the MovieTexture with as transparent, and those browser that does not support this feature could simply fall back with rendering the MovieTexture in a normal way (i.e. showing the texture as is).
MovieTexture:X3DBackgroundNode { ... // same to the MovieTexture node described in 2.1 SFColor [in] keyColor }
4.3 Proposal C
This proposal doesn't include direct solution to this case. Closely related functions in this proposal would be the ColorMaskMode node and BlendMode as a child of Appearance node.
The ColorMaskMode masks a specific color channel, and this results color changes in the global image. Rather than resulting pixels in key color to appear transparent, the ColorMaskMode makes color changes in every pixel.
<ColorMaskMode maskR='TRUE' maskG='TRUE' maskB='TRUE' maskA='TRUE' logFeature='' />
The BlendMode gives general control over alpha blending function. However, there is no such function that compares the source images with a given key color, which is necessary to have proper result for color keying.
<BlendMode srcFactor='src_alpha' destFactor='one_minus_src_alpha' color='1 1 1' colorTransparency='0' alphaFunc='none' alphaFuncValue='0' equation='none' logFeature='' />
4.4 Discussion
Proposal A suggests simpler way to provide a specific color keying function for textures, while C suggests a more generic functions that can achieve required function. Although, the current proposed nodes in proposal C misses certain features to fulfill color keying, therefore needs some modification. Again, the trade off between simplicity and flexibility/extensibility needs further discussion.
5. Retrieving tracking information
5.1 Proposal A
This proposal suggests using the same CameraSensor node, used for retrieving live video stream, for retrieving tracking information. As described in 2.1, the proposed CameraSensor node includes ‘position’ and ‘orientation’ fields that represent the tracking information of the camera motion.
CameraSensor:X3DDirectSensorNode { SFImage [out] value SFBool [out] on FALSE SFMatrix4f [out] projmat "1 0 0 0 … “ SFBool [out] tracking FALSE SFVec3f [out] position SFRotation [out] orientation }
The method has its limitations with not supporting tracking information of general objects other than the camera sensor.
5.3 Proposal C
For retrieving tracking information, this proposal uses the same IOSensor node used for retrieving camera image. The TrackedObject1Camera_ModelView field of the IOSensor node represents the transformation matrix of tracked position of the tracked object (visual marker).
<IOSensor DEF='VisionLib' type='VisionLib' configFile='TutorialMarkerTracking_OneMarker.pm'> <field accessType='outputOnly' name='VideoSourceImage' type='SFImage'/> <field accessType='outputOnly' name='TrackedObject1Camera_ModelView' type='SFMatrix4f'/> <field accessType='outputOnly' name='TrackedObject1Camera_PrincipalPoint' type='SFVec2f'/> <field accessType='outputOnly' name='TrackedObject1Camera_FOV_horizontal' type='SFFloat'/> <field accessType='outputOnly' name='TrackedObject1Camera_FOV_vertical' type='SFFloat'/> <field accessType='outputOnly' name='TrackedObject1Camera_CAM_aspect' type='SFFloat'/> </IOSensor>
The node could support multiple tracking objects by changing the configFile (TutorialMarkerTracking_OneMarker.pm file in the sample code), and defining additional ModelView fields for tracked objects.
5.4 Discussion
While both proposes to retrieve tracking information from a node that represents a camera sensor, proposal A gives the tracking information of the camera, while C deals with the tracking information of tracked object. This makes proposal C to be more extensible in terms of supporting multiple tracking objects. However, the method used for defining tracking objects and markers through proprietary configuration file needs to be revised for standardization.
6. Using tracking information to change 3D scene
6.1 Proposal A
This proposal proposes to use routing method to link tracking information from the CameraSensor node to a Viewpoint node’s position and orientation, in general. This could be also extended by a MatrixViewpoint node (to be described in 8.1) which could have a field to identify the corresponding CameraSensor node, causing the same results without explicitly routing the corresponding fields.
6.3 Proposal C
This proposal proposes to use routing method to link tracking information from the IOSensor node to a Transform node of a corresponding virtual object.
<MatrixTransform DEF='TransformRelativeToCam'> <Shape> <Appearance> <Material diffuseColor='1 0.5 0' /> </Appearance> <Teapot size='5 5 5' /> </Shape> </MatrixTransform> <ROUTE fromNode='VisionLib' fromField='Camera_ModelView' toNode='TransformRelativeToCam' toField='set_matrix'/>
For routing a transform matrix to a transform node, this proposal also proposes a MatrixTransform node that takes a transform matrix directly, rather than using position and orientation fields.
MatrixTransform : X3DGroupingNode { ... SFBool [in,out] render TRUE SFMatrix4f [in,out] matrix identity }
6.4 Discussion
While both proposals relies on routing for applying tracking results for updating the 3D scene, as discussed in 5.4, proposal A focuses on updating the Viewpoint node, while proposal C uses for updating a virtual object (or scene). Proposal C also proposes a new type of transformation node for dealing with transformation matrices, while A sticks to traditional position and orientation vectors.
7. Retrieving camera calibration (internal parameters) information
7.1 Proposal A
This proposal suggests using the same CameraSensor node, used for retrieving live video stream, for retrieving camera calibration information. As described in 2.1, the proposed CameraSensor node includes a ‘projmat’ field which represents the calibration information of the CameraSensor.
CameraSensor:X3DDirectSensorNode { SFImage [out] value SFBool [out] on FALSE SFMatrix4f [out] projmat "1 0 0 0 … “ SFBool [out] tracking FALSE SFVec3f [out] position SFRotation [out] orientation }
7.3 Proposal C
This proposal suggests using the same IOSensor node, used for retrieving images from camera sensor. Four fields (TrackedObject1Camera_PrincipalPoint, TrackedObject1Camera_FOV_horizontal, TrackedObject1Camera_FOV_vertical, TrackedObject1Camera_CAM_aspect) in this node provides the calibration information.
<IOSensor DEF='VisionLib' type='VisionLib' configFile='TutorialMarkerTracking_OneMarker.pm'> <field accessType='outputOnly' name='VideoSourceImage' type='SFImage'/> <field accessType='outputOnly' name='TrackedObject1Camera_ModelView' type='SFMatrix4f'/> <field accessType='outputOnly' name='TrackedObject1Camera_PrincipalPoint' type='SFVec2f'/> <field accessType='outputOnly' name='TrackedObject1Camera_FOV_horizontal' type='SFFloat'/> <field accessType='outputOnly' name='TrackedObject1Camera_FOV_vertical' type='SFFloat'/> <field accessType='outputOnly' name='TrackedObject1Camera_CAM_aspect' type='SFFloat'/> </IOSensor>
7.4 Discussion
Both proposals suggest reusing the node that is used for accessing a camera sensor, and using a dedicated field of that node for providing camera calibration information. While proposal A suggests to use projection matrix as a calibration information, C suggests using a set of parameters. The latter approach could be safer in terms of encapsulating the projection matrix of a viewpoint which could be implementation dependent based on what graphics API it is using.
8. Using calibration information to set properties of (virtual) camera
8.1 Proposal A
This proposal suggests a MatrixViewpoint node, which is a child of a scene node which represents a virtual viewpoint calibrated according to the corresponding physical live video camera (on the user's computer). The 'projmat' field represents the internal parameters (or projection matrix) of the MatrixViewpoint. The ‘position' and ‘orientation’ fields represent three dimensional position and orientation of the viewpoint within the virtual space. The ‘cameraSensor’ field represents a CameraSensor node, from which the viewpoint parameters (including projmat, position and orientation fields) of the MatrixViewpoint are updated according to. Once the ‘cameraSensor’ field is assigned with a validate CameraSensor node, the viewpoint parameters are updated according to the values from the CameraSensor node, assigned. Otherwise, it could be also used with routing each parameter of the MatrixViewpoint node from corresponding source of calibrated values.
MatrixViewpoint : X3DViewpointNode{ SFMatrix4f [in,out] projmat SFVec3f [in,out] position SFRotation [in,out] orientation SFNode [in,out] cameraSensor }
8.3 Proposal C
Viewpoint : X3DViewpointNode { ... SFString [in,out] fovMode VERTICAL SFVec2f [in,out] principalPoint 0 0 SFFloat [in,out] aspect 1.0 }
The new fields provide a more general camera model than the standard Viewpoint. The "principalPoint" field defines the relative position of the principal point. If the principal point is not equal to zero, the viewing frustum parameters (left, right, top, bottom) are simply shifted in the camera's image plane. A value of x = 2 means the left value is equal to the default right value. A value of x = -2 means the right value is equal to default. If the principal point is not equal to zero, the "fieldOfView" value is not equal to the real field of view of the camera, otherwise it complies with the default settings.
To extend this idea, the "fovMode" defines whether the field of view is measured vertically, horizontally or in the smaller direction, which is important for correctly parameterizing the aforementioned cinematographic camera. The field ``aspect defines the aspect ratio for the viewing angle defined by the "fieldOfView" range. This setting is independent of the current aspect ratio of the window, but reflects the aspect ratio of the actual capturing device. This extension allows us to model cameras with a non-quadratic pixel format, i.e. it defines (width / height) of a pixel.
In addition to the Viewpoint extension we include a new camera node named Viewfrustum. This node has the two input/output fields "modelview" and "projection" of type SFMatrix4f. With the Viewfrustum node we are able to define a camera position and projection utilizing a standard projection/ modelview matrix pair.
Viewfrustum : X3DViewpointNode { ... SFMatrix4f [in,out] modelview (identity) SFMatrix4f [in,out] projection (identity) }
9. Specifying nodes as physical object representatives
9.1 Proposal A
This proposal suggests a GhostGroup node for indicating its child nodes being representatives of physical objects for visualizing correct occlusion. The proposed node is extended from Group node to support those geometries of its child nodes are rendered as ghost objects. The browser should render the child nodes only into the depth buffer and not into the color buffer. As a result, the portion of the live video image corresponding to the ghost object is visualized with correct depth value, forming correct occlusion with other virtual objects.
Group: X3DGroupingNode{ ... // same to the original Group node }
9.3 Proposal C
See http://www.web3d.org/x3d/wiki/index.php/X3D_and_Augmented_Reality