Difference between revisions of "January 28th, 2013 at 5:00pm PST, Agenda and Minutes"
(Created page with "The H-Anim WG meeting will be held with agenda items as follows: '''1. Review of Joe's comments''' Thank you very much for sending many valuable messages and information....") |
(fix english word typos) |
||
(8 intermediate revisions by one other user not shown) | |||
Line 1: | Line 1: | ||
+ | -------------------------------- | ||
+ | '''Agenda''' | ||
+ | -------------------------------- | ||
+ | |||
The H-Anim WG meeting will be held with agenda items as follows: | The H-Anim WG meeting will be held with agenda items as follows: | ||
Line 9: | Line 13: | ||
On February 14, Joe mentioned: | On February 14, Joe mentioned: | ||
− | + | http://www.euclideanspace.com/maths/geometry/rotations/euler/index.htm | |
− | + | Of current importance, this shows conversion between those two most important forms and the Euler Angle representation. Euler angle is a proposed candidate h-anim joint animation input form due to its | |
− | + | current use in consumer motion interaction simulations. However, if it | |
− | + | is the wg intent to actually add Eulerangle -> axisangle conversion | |
− | + | internal to the X3D browser, I suggest that it is much more reliable | |
− | + | and much more efficient and totally sufficient for an X3D tool to | |
− | + | expect any external motion devices to interact with our h-anim | |
− | + | character using native forms of rotation and location. | |
− | + | ||
− | + | Myeong ==> | |
For animation generators or browsers, Euler angles may be used efficiently. | For animation generators or browsers, Euler angles may be used efficiently. | ||
Line 25: | Line 29: | ||
then the humanoid file format shouldn’t include them. | then the humanoid file format shouldn’t include them. | ||
For the file format to include Euler angles, all browsers would have to be able to interpret them. | For the file format to include Euler angles, all browsers would have to be able to interpret them. | ||
+ | |||
+ | Joe ==> | ||
+ | |||
+ | I am seeing the Euler angles used for recording video where every | ||
+ | frame is a keyframe with no interpolation. | ||
+ | I think a prototype Joint node with a script to convert the Euler | ||
+ | angles to the native axis-angle form to drive the Joint rotation input | ||
+ | would be appropriate for an example but I do not believe we should | ||
+ | make use of Euler angle values a requirement for the realtime | ||
+ | browser. | ||
--------------------------------- | --------------------------------- | ||
Line 30: | Line 44: | ||
On February 6, Joe mentioned: | On February 6, Joe mentioned: | ||
− | + | [What is the difference between 'motion capture' and 'scanner' data? | |
− | + | ||
− | + | I associate 'motion capture' data where some specific surface features | |
− | + | are tracked and recorded in order to recreate motions in the context | |
− | + | of a skeleton. I associate 'scanner' data with external surface | |
− | + | feature detection in order to recreate an external surface or 'skin' | |
− | + | without the need to generate animations based in the context of a | |
− | + | skeleton. | |
− | + | If a 'scanner' detects motion by tracking features for the purpose of | |
− | + | animating the skeleton hierarchy, then I would call it 'motion | |
− | + | capture' instead. | |
− | + | If the application is just seeking and tracking various external | |
− | + | surface feature points to create a model skin without connection with | |
+ | a skeleton, I would call it a scanner; thus no h-anim motion. | ||
+ | |||
+ | Myeong ==> | ||
Motion capture devices usually generate and store location and rotation parameters into bvh files, for example, | Motion capture devices usually generate and store location and rotation parameters into bvh files, for example, | ||
Line 50: | Line 67: | ||
In my thinking, skin feature points are directly relevant to a 3D scanner data set rather than motion captured data. | In my thinking, skin feature points are directly relevant to a 3D scanner data set rather than motion captured data. | ||
In other words, we obtain skin feature points from 3D scanner data and then generate skin motion using motion captured data, if necessary. | In other words, we obtain skin feature points from 3D scanner data and then generate skin motion using motion captured data, if necessary. | ||
+ | |||
+ | Joe ==> | ||
+ | |||
+ | This is a complicated process. However, I think the same skin feature | ||
+ | points can be used for both static scanning and for motion capture. | ||
+ | Several motion capture systems are now using sensors in joints of the | ||
+ | motion capture apparatus instead of visual tracking so that is a | ||
+ | slightly different problem. | ||
--------------------------------- | --------------------------------- | ||
Line 55: | Line 80: | ||
On February 2, Joe mentioned: | On February 2, Joe mentioned: | ||
− | + | Displacer nodes can be used to animate any geometry anywhere on or in | |
− | + | the h-anim character without any limits. An X3D author can create and | |
− | + | document any sort of animation conceivable and call it anything the | |
− | + | author desires and show it anywhere for free. In order for these | |
− | + | animations to be transportable without complex processing and some | |
− | + | guesses, the 'skin' must also be transportable. Transportable skin | |
− | + | means that the same vertex, or set of vertices, serve the same | |
− | + | 'standard' feature point in a similar location. | |
+ | |||
+ | Myeong ==> | ||
According to Joe's definition, a humanoid model consists of transportable skeleton and transportable skin. | According to Joe's definition, a humanoid model consists of transportable skeleton and transportable skin. | ||
Line 68: | Line 95: | ||
For a human, skeleton and skin are tightly coupled. The skin or skeleton is usually not used for other humanoids, as it is | For a human, skeleton and skin are tightly coupled. The skin or skeleton is usually not used for other humanoids, as it is | ||
specific to a given humanoid. | specific to a given humanoid. | ||
+ | |||
+ | Joe ==> | ||
+ | |||
+ | First let's use the word 'transportable' only with regard to the | ||
+ | animation routines. | ||
+ | An animation is transportable between skeletons when the joint | ||
+ | structure is the same or reasonably similar. That is, the skeleton has | ||
+ | the same joint structures. It is not necessary that the skeleton1 is | ||
+ | the same "size" as skeleton2. | ||
+ | If both you and I are making a representation of ourselves, we would | ||
+ | use the same same Joints, but at slightly different locations because | ||
+ | we are different sizes. In general, the size alone would not restrict | ||
+ | us from using the same animation routines for both skeletons. | ||
+ | |||
+ | If we include a deformable skin, then each vertex of the skin is | ||
+ | connected to one of more Joint nodes so that the skin can be animated | ||
+ | by joint rotations. In this case, an animation of one character is | ||
+ | transportable when the skins of both characters are hooked up the same | ||
+ | way. | ||
+ | In the most simple case, if both skins have the same number of | ||
+ | vertices and corresponding vertices are hooked up to the same Joints | ||
+ | then the animation will be transportable between two skeletons. | ||
+ | |||
+ | Note that both skins would not need to be the same size, just that the | ||
+ | skin vertices are hooked up the same way. | ||
+ | |||
+ | Myeong ==> | ||
+ | |||
In my thinking, it is enough to model skin with the skeleton of a person. | In my thinking, it is enough to model skin with the skeleton of a person. | ||
In addition, I’m concerned that skin separately designed from the skeleton could introduce a retargeting problem | In addition, I’m concerned that skin separately designed from the skeleton could introduce a retargeting problem | ||
separate from the case of motion because skin must be adjusted to skeleton and segments. | separate from the case of motion because skin must be adjusted to skeleton and segments. | ||
+ | |||
+ | Joe ==> | ||
+ | |||
+ | Great thought. Please note that the h-anim example user code in the | ||
+ | standard uses the 'typical' xyz non-normative dimensions obtained from | ||
+ | a big research project which sampled large number of human dimensions. | ||
+ | This produces a skeleton constructed in 'human' space with 'human' | ||
+ | dimensions. If I want to customize it for myself then I just change | ||
+ | the location of joints and length of segments according to my actual | ||
+ | measurements. As long as my custom skeleton is the same structure | ||
+ | meaning the same number of joints and segments, I can use an animation | ||
+ | for any similar skeleton and get similar results. | ||
+ | |||
+ | When I add a continuous mesh deformable skin it gets more complex | ||
+ | because I must connect each skin vertex to the appropriate one or two | ||
+ | joints that control its motion. I would prefer to draw the skin in the | ||
+ | same 'human' space as the skeleton. In the h-anim standard we defined | ||
+ | several feature points and gave a 'typical' xyz value having dimension | ||
+ | in the same skeleton space. To me, these feature point markers seem | ||
+ | like great vertex points for the skin. I just change the xyz locations | ||
+ | to my measurements. I end up with a custom skeleton and a custom skin. | ||
+ | Somebody else could use this skin by simply changing the xyz feature | ||
+ | point locations to match their personal dimensions, just like resizing | ||
+ | the skeleton. | ||
+ | |||
+ | Now, given that the skeleton is similar structurally and the same skin | ||
+ | vertices are hooked up the same joints, then animation routines for | ||
+ | one model could be used for another model. | ||
--------------------------------- | --------------------------------- | ||
Line 76: | Line 159: | ||
On January 28, Joe mentioned: | On January 28, Joe mentioned: | ||
− | + | Just to pin down what I am discussing as the "skin drawn in skeleton | |
− | + | space" please see this part of listing from: | |
− | + | http://www.hypermultimedia.com/x3d/hanim/JoeH-AnimKick1a.txt | |
+ | |||
+ | Myeong ==> | ||
Re: 389 skin feature points. | Re: 389 skin feature points. | ||
+ | |||
I am wondering how to map humanoid mesh data to the points. | I am wondering how to map humanoid mesh data to the points. | ||
I’m not sure yet that such a large set of skin feature points is necessary. | I’m not sure yet that such a large set of skin feature points is necessary. | ||
− | I will study this more, but my | + | I will study this more, but my considerations are as follows: |
- Skin feature points may be needed for tracking the motion of skin. | - Skin feature points may be needed for tracking the motion of skin. | ||
Line 90: | Line 176: | ||
Skin aging is different because here it is better to see that it does not require a change of feature points, but rather a change of materials. | Skin aging is different because here it is better to see that it does not require a change of feature points, but rather a change of materials. | ||
− | - Rather, muscle feature points may be | + | - Rather, muscle feature points may be necessary because muscle can generate motion. |
However, the problem is that muscle is hidden under skin, and so it is difficult to represent muscle motion using skin. | However, the problem is that muscle is hidden under skin, and so it is difficult to represent muscle motion using skin. | ||
Muscle should be represented independently from skin. | Muscle should be represented independently from skin. | ||
Line 120: | Line 206: | ||
http://web3d.org/x3d/wiki/index.php/H-Anim | http://web3d.org/x3d/wiki/index.php/H-Anim | ||
− | |||
'''3. Review of the NWIP documents''' | '''3. Review of the NWIP documents''' | ||
Line 126: | Line 211: | ||
Please send any comments about the documents. | Please send any comments about the documents. | ||
They will be amended based on your comments. | They will be amended based on your comments. | ||
− | |||
'''4. Scheduling next meeting''' | '''4. Scheduling next meeting''' | ||
(1st Wed) April 3rd at 5:00pm PDT (4th, 9:00am KST) | (1st Wed) April 3rd at 5:00pm PDT (4th, 9:00am KST) | ||
+ | |||
+ | ------------------------------------ |
Latest revision as of 11:39, 2 April 2013
Agenda
The H-Anim WG meeting will be held with agenda items as follows:
1. Review of Joe's comments
Thank you very much for sending many valuable messages and information. Below is the list of selected topics starting with the most current:
On February 14, Joe mentioned:
http://www.euclideanspace.com/maths/geometry/rotations/euler/index.htm
Of current importance, this shows conversion between those two most important forms and the Euler Angle representation. Euler angle is a proposed candidate h-anim joint animation input form due to its current use in consumer motion interaction simulations. However, if it is the wg intent to actually add Eulerangle -> axisangle conversion internal to the X3D browser, I suggest that it is much more reliable and much more efficient and totally sufficient for an X3D tool to expect any external motion devices to interact with our h-anim character using native forms of rotation and location.
Myeong ==>
For animation generators or browsers, Euler angles may be used efficiently. However, I am thinking that since all current motion capture devices may not provide Euler parameter values, then the humanoid file format shouldn’t include them. For the file format to include Euler angles, all browsers would have to be able to interpret them.
Joe ==>
I am seeing the Euler angles used for recording video where every frame is a keyframe with no interpolation. I think a prototype Joint node with a script to convert the Euler angles to the native axis-angle form to drive the Joint rotation input would be appropriate for an example but I do not believe we should make use of Euler angle values a requirement for the realtime browser.
On February 6, Joe mentioned:
[What is the difference between 'motion capture' and 'scanner' data?
I associate 'motion capture' data where some specific surface features are tracked and recorded in order to recreate motions in the context of a skeleton. I associate 'scanner' data with external surface feature detection in order to recreate an external surface or 'skin' without the need to generate animations based in the context of a skeleton. If a 'scanner' detects motion by tracking features for the purpose of animating the skeleton hierarchy, then I would call it 'motion capture' instead. If the application is just seeking and tracking various external surface feature points to create a model skin without connection with a skeleton, I would call it a scanner; thus no h-anim motion.
Myeong ==>
Motion capture devices usually generate and store location and rotation parameters into bvh files, for example, while 3D scanner devices usually generate and store geometric polygon data into ply files, for example. Motion capture files usually include motion parameter values for representing the motion of joints. 3D scanner data usually includes coordinate values for the entire polygon data set of a scanned object. In my thinking, skin feature points are directly relevant to a 3D scanner data set rather than motion captured data. In other words, we obtain skin feature points from 3D scanner data and then generate skin motion using motion captured data, if necessary.
Joe ==>
This is a complicated process. However, I think the same skin feature points can be used for both static scanning and for motion capture. Several motion capture systems are now using sensors in joints of the motion capture apparatus instead of visual tracking so that is a slightly different problem.
On February 2, Joe mentioned:
Displacer nodes can be used to animate any geometry anywhere on or in the h-anim character without any limits. An X3D author can create and document any sort of animation conceivable and call it anything the author desires and show it anywhere for free. In order for these animations to be transportable without complex processing and some guesses, the 'skin' must also be transportable. Transportable skin means that the same vertex, or set of vertices, serve the same 'standard' feature point in a similar location.
Myeong ==>
According to Joe's definition, a humanoid model consists of transportable skeleton and transportable skin. I am not yet sure of this definition. I don't fully understand why skin should be transportable. For a human, skeleton and skin are tightly coupled. The skin or skeleton is usually not used for other humanoids, as it is specific to a given humanoid.
Joe ==>
First let's use the word 'transportable' only with regard to the animation routines. An animation is transportable between skeletons when the joint structure is the same or reasonably similar. That is, the skeleton has the same joint structures. It is not necessary that the skeleton1 is the same "size" as skeleton2. If both you and I are making a representation of ourselves, we would use the same same Joints, but at slightly different locations because we are different sizes. In general, the size alone would not restrict us from using the same animation routines for both skeletons.
If we include a deformable skin, then each vertex of the skin is connected to one of more Joint nodes so that the skin can be animated by joint rotations. In this case, an animation of one character is transportable when the skins of both characters are hooked up the same way. In the most simple case, if both skins have the same number of vertices and corresponding vertices are hooked up to the same Joints then the animation will be transportable between two skeletons.
Note that both skins would not need to be the same size, just that the skin vertices are hooked up the same way.
Myeong ==>
In my thinking, it is enough to model skin with the skeleton of a person. In addition, I’m concerned that skin separately designed from the skeleton could introduce a retargeting problem separate from the case of motion because skin must be adjusted to skeleton and segments.
Joe ==>
Great thought. Please note that the h-anim example user code in the standard uses the 'typical' xyz non-normative dimensions obtained from a big research project which sampled large number of human dimensions. This produces a skeleton constructed in 'human' space with 'human' dimensions. If I want to customize it for myself then I just change the location of joints and length of segments according to my actual measurements. As long as my custom skeleton is the same structure meaning the same number of joints and segments, I can use an animation for any similar skeleton and get similar results.
When I add a continuous mesh deformable skin it gets more complex because I must connect each skin vertex to the appropriate one or two joints that control its motion. I would prefer to draw the skin in the same 'human' space as the skeleton. In the h-anim standard we defined several feature points and gave a 'typical' xyz value having dimension in the same skeleton space. To me, these feature point markers seem like great vertex points for the skin. I just change the xyz locations to my measurements. I end up with a custom skeleton and a custom skin. Somebody else could use this skin by simply changing the xyz feature point locations to match their personal dimensions, just like resizing the skeleton.
Now, given that the skeleton is similar structurally and the same skin vertices are hooked up the same joints, then animation routines for one model could be used for another model.
On January 28, Joe mentioned:
Just to pin down what I am discussing as the "skin drawn in skeleton space" please see this part of listing from: http://www.hypermultimedia.com/x3d/hanim/JoeH-AnimKick1a.txt
Myeong ==>
Re: 389 skin feature points.
I am wondering how to map humanoid mesh data to the points. I’m not sure yet that such a large set of skin feature points is necessary. I will study this more, but my considerations are as follows:
- Skin feature points may be needed for tracking the motion of skin. If there is no skin motion, feature points would not be necessary. Skin usually moves with joints or muscles, while the skin's material does not change with the motion. Skin aging is different because here it is better to see that it does not require a change of feature points, but rather a change of materials.
- Rather, muscle feature points may be necessary because muscle can generate motion. However, the problem is that muscle is hidden under skin, and so it is difficult to represent muscle motion using skin. Muscle should be represented independently from skin.
- With camera or scanner technology, it is easy to obtain realistic skin using texture mapping. In this case, I am not sure if skin feature points are necessary.
- Despite these concerns, if the 389 feature points are used, how will such a large number of points be mapped amongst the large data set of a human model? A human model may be generated from a 3D scanner or from large mesh data sets by a geometric modeller. In the case of a scanner, we would have to define the 389 feature points to generate the H-Anim data, and, then, how would we generate animation using the points?
- Another problem is how to know how an assigned feature point for one human maps to a corresponding feature point for another human. The tip of the skull is ok, but, I am not sure, for example, how we can find out a vertex corresponding to the No. 74 r_neck_base among a number of neck vertices. Otherwise, do you mean that a character designer must provide the number among a number of neck vertices? Then, do you mean that the designer must provide the 389 numbers amongst a number of whole body skin vertices?
- Some feature points are used for representing humanoid animation as moving points around joints and muscles. Therefore, feature points covering the entire human skin may not be necessary.
- If we track such a large number of skin feature points using motion capture devices, it seems that their exact position and rotation parameters cannot always be obtained.
2. H-Anim WG Wiki update
http://web3d.org/x3d/wiki/index.php/H-Anim
3. Review of the NWIP documents
Please send any comments about the documents. They will be amended based on your comments.
4. Scheduling next meeting
(1st Wed) April 3rd at 5:00pm PDT (4th, 9:00am KST)