rotation_complex_movietexture.x3d

Test rotation field for MovieTexture mapping to complex geometry. Test browser ability to apply rotations of (left to right) -180, -90, +45, +90 and +180 degrees to an MovieTexture mapped to the faces of complex geometry, using default complex geometry mapping rules. The result is (for the bottom face of the ElevationGrid, the side and bottom end cap of the Extrusion, and the front of the IndexedFaceSet) the first column of geometry should show the VTS logo upside-down and spelling to the left for these faces. The second column of geometry should map the VTS logo with the positive horizontal direction pointing up, and the positive vertical axis pointing left. The third column should map the VTS logo right side up on a downward 45 degree angle. The fourth column should map the VTS logo vertically downward, with the +T direction to the right. The fifth column should be identical to column #1. Opposite geometry faces should show reversed mapping, and side faces for the IndexedFaceSet should show smeared end pixels of the front and back faces.