java.lang.Object

org.web3d.x3d.jsail.Geospatial.GeoOriginObject

All Implemented Interfaces:: X3DNode, GeoOrigin

public class GeoOriginObject
extends X3DConcreteNode
implements GeoOrigin

GeoOrigin is deprecated and discouraged (but nevertheless allowed) in X3D version 3.3. GeoOrigin is restored in X3D version 4.0 for special use on devices with limited floating-point resolution.

X3D node tooltip: [X3DNode] GeoOrigin specifies local geospatial coordinate system for parent node, enabling increased geographic precision during scene rendering (by mitigating potential floating-point roundoff errors). GeoOrigin can be contained by other Geospatial component nodes, typically via DEF/USE to ensure consistency.

Hint: only one geospatial coordinate system is allowed per scene, thus DEF-ing and later USE-ing only one GeoOrigin node per scene is recommended.
Hint: X3D for Advanced Modeling (X3D4AM) slideset http://x3dgraphics.com/slidesets/X3dForAdvancedModeling/GeospatialComponentX3dEarth.pdf
Warning: requires X3D profile='Full' or else include <component name='Geospatial' level='1'/>
Warning: GeoOrigin is deprecated, discouraged and not legal in X3D v3.3. GeoOrigin can be ignored in X3D v3.2 and below.
Hint: GeoOrigin is likely to be restored in X3D v4.0 for special use on devices with limited floating-point resolution.
Hint: X3D Architecture 25.2.5 Dealing with high-precision coordinates https://www.web3d.org/documents/specifications/19775-1/V3.3/Part01/components/geodata.html#high-precisioncoords
Warning: XML validation requires placement as first child node following contained metadata nodes (if any).

Package hint: This org.web3d.x3d.jsail concrete class is used for implementing a standalone X3D object as a Plain Old Java Object (POJO). If you are writing Java code for use inside an X3D Script node, compile separate code using only the org.web3d.x3d.sai package instead.

See Also:: X3D Abstract Specification: GeoOrigin, X3D Tooltips: GeoOrigin, X3D Scene Authoring Hints

Field Summary

Fields
Modifier and Type	Field	Description
`static java.lang.String`	`COMPONENT`	String constant COMPONENT defines X3D component for the GeoOrigin element: Geospatial
`static java.lang.String`	`containerField_DEFAULT_VALUE`	containerField describes typical field relationship of a node to its parent.
`static java.lang.String`	`fromField_GEOCOORDS`	fromField ROUTE name for SFVec3d field named geoCoords.
`static java.lang.String`	`fromField_IS`	fromField ROUTE name for SFNode field named IS.
`static java.lang.String`	`fromField_METADATA`	fromField ROUTE name for SFNode field named metadata.
`static double[]`	`GEOCOORDS_DEFAULT_VALUE`	SFVec3d field named geoCoords has default value {0,0,0} (Java syntax) or 0 0 0 (XML syntax).
`static java.util.ArrayList<java.lang.String>`	`GEOSYSTEM_DEFAULT_VALUE`	MFString field named geoSystem has default quoted value new String[] {"GD","WE"} (Java syntax) or quoted value "GD" "WE" (XML syntax).
`static ISObject`	`IS_DEFAULT_VALUE`	SFNode field named IS has default value null (Java syntax) or NULL (XML syntax).
`static int`	`LEVEL`	Integer constant LEVEL provides default X3D Geospatial component level for this element: 1
`static X3DMetadataObject`	`METADATA_DEFAULT_VALUE`	SFNode field named metadata has default value null (Java syntax) or NULL (XML syntax).
`static java.lang.String`	`NAME`	String constant NAME provides name of this element: GeoOrigin.
`static boolean`	`ROTATEYUP_DEFAULT_VALUE`	SFBool field named rotateYUp has default value false (Java syntax) or false (XML syntax).
`static java.lang.String`	`toField_GEOCOORDS`	toField ROUTE name for SFVec3d field named geoCoords.
`static java.lang.String`	`toField_METADATA`	toField ROUTE name for SFNode field named metadata.

Fields inherited from class org.web3d.x3d.jsail.X3DConcreteNode

CLASS_DEFAULT_VALUE, containerField_ALTERNATE_VALUES, DEF_DEFAULT_VALUE, USE_DEFAULT_VALUE

Fields inherited from class org.web3d.x3d.jsail.X3DConcreteElement

validationResult

Constructor Summary

Constructors
Constructor	Description
`GeoOriginObject()`	Constructor for GeoOriginObject to initialize member variables with default values.
`GeoOriginObject(java.lang.String DEFlabel)`	Utility constructor that assigns DEF label after initializing member variables with default values.

Method Summary

Modifier and Type	Method	Description
`GeoOriginObject`	`addComments(java.lang.String newComment)`	Add comment as String to contained commentsList.
`GeoOriginObject`	`addComments(java.lang.String[] newComments)`	Add comments as String[] array to contained commentsList.
`GeoOriginObject`	`addComments(CommentsBlock newCommentsBlock)`	Add CommentsBlock to contained commentsList.
`GeoOriginObject`	`addGeoSystem(java.lang.String newValue)`	Add singleton String value to MFString geoSystem field.
`GeoOriginObject`	`addGeoSystem(SFStringObject newValue)`	Add singleton SFStringObject value to MFString geoSystem field.
`GeoOriginObject`	`clearGeoSystem()`	Utility method to clear MFString value of geoSystem field.
`GeoOriginObject`	`clearIS()`	Utility method to clear SFNode value of IS field.
`GeoOriginObject`	`clearMetadata()`	Utility method to clear SFNode value of metadata field.
`X3DConcreteElement`	`findElementByNameValue(java.lang.String nameValue)`	Recursive method to provide object reference to node or statement by name attribute, if found as part of this element or in a contained element.
`X3DConcreteElement`	`findElementByNameValue(java.lang.String nameValue, java.lang.String elementName)`	Recursive method to provide object reference to node or statement by name attribute, if found as part of this element or in a contained element.
`X3DConcreteNode`	`findNodeByDEF(java.lang.String DEFvalue)`	Recursive method to provide object reference to node by DEF, if found as this node or in a contained node.
`java.lang.String`	`getAccessType(java.lang.String fieldName)`	Indicate accessType corresponding to given fieldName.
`java.lang.String`	`getComponent()`	Defines X3D component for the GeoOrigin element: Geospatial
`int`	`getComponentLevel()`	Provides default X3D component level for this element: 1
`java.lang.String`	`getContainerFieldDefault()`	containerField describes typical field relationship of a node to its parent.
`java.lang.String`	`getCssClass()`	Provide String value from inputOutput SFString field named class.
`java.lang.String`	`getDEF()`	Provide String value from inputOutput SFString field named DEF.
`java.lang.String`	`getElementName()`	Provides name of this element: GeoOrigin
`java.lang.String`	`getFieldType(java.lang.String fieldName)`	Indicate type corresponding to given fieldName.
`double[]`	`getGeoCoords()`	Provide array of 3-tuple double results from inputOutput SFVec3d field named geoCoords.
`java.lang.String[]`	`getGeoSystem()`	Provide array of String results from initializeOnly MFString field named geoSystem.
`java.util.ArrayList<java.lang.String>`	`getGeoSystemList()`	Utility method to get ArrayList value of MFString geoSystem field, similar to `getGeoSystem()`.
`java.lang.String`	`getGeoSystemString()`	Utility method to get String value of MFString geoSystem field, similar to `getGeoSystem()`.
`ISObject`	`getIS()`	Provide ISObject instance (using a properly typed node) from inputOutput SFNode field IS.
`X3DMetadataObject`	`getMetadata()`	Provide X3DMetadataObject instance (using a properly typed node) from inputOutput SFNode field metadata.
`boolean`	`getRotateYUp()`	Provide boolean value from initializeOnly SFBool field named rotateYUp.
`java.lang.String`	`getUSE()`	Provide String value from inputOutput SFString field named USE.
`boolean`	`hasElementByNameValue(java.lang.String nameValue, java.lang.String elementName)`	Recursive method to determine whether node or statement with given name attribute is found, meaning both objects are attached to same scene graph.
`boolean`	`hasIS()`	Indicate whether an object is available for inputOutput SFNode field IS.
`boolean`	`hasMetadata()`	Indicate whether an object is available for inputOutput SFNode field metadata.
`boolean`	`hasNodeByDEF(java.lang.String DEFvalue)`	Recursive method to determine whether node with DEFvalue is found, meaning both objects are attached to same scene graph.
`void`	`initialize()`	Initialize all member variables to default values.
`GeoOriginObject`	`setCssClass(java.lang.String newValue)`	Accessor method to assign String value to inputOutput SFString field named class.
`GeoOriginObject`	`setCssClass(SFStringObject newValue)`	Assign typed object value to SFString cssClass field, similar to `setCssClass(String)`.
`GeoOriginObject`	`setDEF(java.lang.String newValue)`	Accessor method to assign String value to inputOutput SFString field named DEF.
`GeoOriginObject`	`setDEF(SFStringObject newValue)`	Assign typed object value to SFString DEF field, similar to `setDEF(String)`.
`GeoOriginObject`	`setGeoCoords(double[] newValue)`	Accessor method to assign 3-tuple double array to inputOutput SFVec3d field named geoCoords.
`GeoOriginObject`	`setGeoCoords(double x, double y, double z)`	Assign values to SFVec3d geoCoords field, similar to `setGeoCoords(double[])`.
`GeoOriginObject`	`setGeoCoords(SFVec3dObject newValue)`	Assign typed object value to SFVec3d geoCoords field, similar to `setGeoCoords(double[])`.
`GeoOriginObject`	`setGeoSystem(java.lang.String newValue)`	Assign singleton String value to MFString geoSystem field, similar to `setGeoSystem(String[])`.
`GeoOriginObject`	`setGeoSystem(java.lang.String[] newValue)`	Accessor method to assign String array to initializeOnly MFString field named geoSystem.
`GeoOriginObject`	`setGeoSystem(java.util.ArrayList<java.lang.String> newValue)`	Assign ArrayList value of MFString geoSystem field, similar to `setGeoSystem(String[])`.
`GeoOriginObject`	`setGeoSystem(MFStringObject newValue)`	Assign typed object value to MFString geoSystem field, similar to `setGeoSystem(String[])`.
`GeoOriginObject`	`setGeoSystem(SFStringObject newValue)`	Assign single SFString object value to MFString geoSystem field, similar to `setGeoSystem(String[])`.
`GeoOriginObject`	`setIS(ISObject newValue)`	Accessor method to assign ISObject instance (using a properly typed node) to inputOutput SFNode field IS.
`GeoOriginObject`	`setMetadata(ProtoInstanceObject newValue)`	Assign ProtoInstance (using a properly typed node) to inputOutput SFNode field metadata.
`GeoOriginObject`	`setMetadata(X3DMetadataObject newValue)`	Accessor method to assign X3DMetadataObject instance (using a properly typed node) to inputOutput SFNode field metadata.
`GeoOriginObject`	`setRotateYUp(boolean newValue)`	Accessor method to assign boolean value to initializeOnly SFBool field named rotateYUp.
`GeoOriginObject`	`setRotateYUp(SFBoolObject newValue)`	Assign typed object value to SFBool rotateYUp field, similar to `setRotateYUp(boolean)`.
`GeoOriginObject`	`setUSE(java.lang.String newValue)`	Accessor method to assign String value to inputOutput SFString field named USE.
`GeoOriginObject`	`setUSE(SFStringObject newValue)`	Assign typed object value to SFString USE field, similar to `setUSE(String)`.
`GeoOriginObject`	`setUSE(GeoOriginObject DEFnode)`	Assign a USE reference to another DEF node of same node type, similar to `setUSE(String)`.
`java.lang.String`	`toStringClassicVRML(int indentLevel)`	Recursive method to provide ClassicVRML string serialization.
`java.lang.String`	`toStringVRML97(int indentLevel)`	Recursive method to provide VRML97 string serialization.
`java.lang.String`	`toStringX3D(int indentLevel)`	Recursive method to provide X3D string serialization of this model subgraph, utilizing XML encoding and conforming to X3D Canonical Form.
`java.lang.String`	`validate()`	Recursive method to validate this element plus all contained nodes and statements, using both datatype-specification value checks and regular expression (regex) checking of corresponding string values.

Methods inherited from class org.web3d.x3d.jsail.X3DConcreteNode

getContainerFieldAlternateValues, getContainerFieldOverride, isNode, isStatement, isUSE, resetContainerFieldOverride, setConcreteCssClass, setConcreteDEF, setConcreteUSE, setContainerFieldOverride

Methods inherited from class org.web3d.x3d.jsail.X3DConcreteElement

clearParentObject, findAncestorElementByName, findAncestorProtoBody, findAncestorSceneObject, findAncestorX3DObject, getPackageName, getParentObject, getValidationResult, hasAncestorElementByName, hasAncestorProtoBody, hasAncestorSceneObject, hasAncestorX3DObject, hasParentObject, isValid, setParentObject, toStringClassicVRML, toStringVRML97, toStringX3D

Methods inherited from class java.lang.Object

clone, equals, finalize, getClass, hashCode, notify, notifyAll, toString, wait, wait, wait

Field Details
- NAME
  
  public static final java.lang.String NAME
  
  String constant NAME provides name of this element: GeoOrigin.
  
  See Also:
  
  Constant Field Values
- COMPONENT
  
  public static final java.lang.String COMPONENT
  
  String constant COMPONENT defines X3D component for the GeoOrigin element: Geospatial
  
  See Also:
  
  Constant Field Values
- LEVEL
  
  public static final int LEVEL
  
  Integer constant LEVEL provides default X3D Geospatial component level for this element: 1
  
  See Also:
  
  Constant Field Values
- GEOCOORDS_DEFAULT_VALUE
  
  public static final double[] GEOCOORDS_DEFAULT_VALUE
  
  SFVec3d field named geoCoords has default value {0,0,0} (Java syntax) or 0 0 0 (XML syntax).
- GEOSYSTEM_DEFAULT_VALUE
  
  public static final java.util.ArrayList<java.lang.String> GEOSYSTEM_DEFAULT_VALUE
  
  MFString field named geoSystem has default quoted value new String[] {"GD","WE"} (Java syntax) or quoted value "GD" "WE" (XML syntax).
- IS_DEFAULT_VALUE
  
  public static final ISObject IS_DEFAULT_VALUE
  
  SFNode field named IS has default value null (Java syntax) or NULL (XML syntax).
- METADATA_DEFAULT_VALUE
  
  public static final X3DMetadataObject METADATA_DEFAULT_VALUE
  
  SFNode field named metadata has default value null (Java syntax) or NULL (XML syntax).
- ROTATEYUP_DEFAULT_VALUE
  
  public static final boolean ROTATEYUP_DEFAULT_VALUE
  
  SFBool field named rotateYUp has default value false (Java syntax) or false (XML syntax).
  
  See Also:
  
  Constant Field Values
- containerField_DEFAULT_VALUE
  
  public static final java.lang.String containerField_DEFAULT_VALUE
  
  containerField describes typical field relationship of a node to its parent. Usage is not ordinarily needed when using this API, default value is provided for informational purposes.
  
  See Also:
  
  X3D Scene Authoring Hints: containerField, X3D Unified Object Model (X3DUOM), Constant Field Values
- fromField_GEOCOORDS
  
  public static final java.lang.String fromField_GEOCOORDS
  
  fromField ROUTE name for SFVec3d field named geoCoords.
  
  See Also:
  
  Constant Field Values
- toField_GEOCOORDS
  
  public static final java.lang.String toField_GEOCOORDS
  
  toField ROUTE name for SFVec3d field named geoCoords.
  
  See Also:
  
  Constant Field Values
- fromField_IS
  
  public static final java.lang.String fromField_IS
  
  fromField ROUTE name for SFNode field named IS.
  
  See Also:
  
  Constant Field Values
- fromField_METADATA
  
  public static final java.lang.String fromField_METADATA
  
  fromField ROUTE name for SFNode field named metadata.
  
  See Also:
  
  Constant Field Values
- toField_METADATA
  
  public static final java.lang.String toField_METADATA
  
  toField ROUTE name for SFNode field named metadata.
  
  See Also:
  
  Constant Field Values
Constructor Details
- GeoOriginObject
  
  public GeoOriginObject()
  
  Constructor for GeoOriginObject to initialize member variables with default values.
- GeoOriginObject
  
  public GeoOriginObject(java.lang.String DEFlabel)
  
  Utility constructor that assigns DEF label after initializing member variables with default values.
  
  Parameters:
  
  DEFlabel - unique DEF name for this X3D node
Method Details
- getElementName
  
  public final java.lang.String getElementName()
  
  Provides name of this element: GeoOrigin
  
  Specified by:
  
  getElementName in class X3DConcreteElement
  
  Returns:
  
  name of this element
- getComponent
  
  public final java.lang.String getComponent()
  
  Defines X3D component for the GeoOrigin element: Geospatial
  
  Specified by:
  
  getComponent in class X3DConcreteElement
  
  Returns:
  
  X3D component for this element
- getComponentLevel
  
  public final int getComponentLevel()
  
  Provides default X3D component level for this element: 1
  
  Specified by:
  
  getComponentLevel in class X3DConcreteElement
  
  Returns:
  
  default X3D component level for this element
- getFieldType
  
  public java.lang.String getFieldType(java.lang.String fieldName)
  
  Indicate type corresponding to given fieldName.
  
  Specified by:
  
  getFieldType in class X3DConcreteElement
  
  Parameters:
  
  fieldName - name of field in this X3D node
  
  Returns:
  
  X3D type (SFvec3f etc.), otherwise ConfigurationProperties.ERROR_UNKNOWN_FIELD_TYPE if not recognized
  
  See Also:
  
  ConfigurationProperties.ERROR_UNKNOWN_FIELD_TYPE
- getAccessType
  
  public java.lang.String getAccessType(java.lang.String fieldName)
  
  Indicate accessType corresponding to given fieldName.
  
  Specified by:
  
  getAccessType in class X3DConcreteElement
  
  Parameters:
  
  fieldName - name of field in this X3D node
  
  Returns:
  
  X3D accessType (inputOnly etc.), otherwise ConfigurationProperties.ERROR_UNKNOWN_FIELD_ACCESSTYPE if not recognized
  
  See Also:
  
  ConfigurationProperties.ERROR_UNKNOWN_FIELD_ACCESSTYPE
- getContainerFieldDefault
  
  public final java.lang.String getContainerFieldDefault()
  
  containerField describes typical field relationship of a node to its parent. Usage is not ordinarily needed when using this API, default value is provided for informational purposes.
  
  Specified by:
  
  getContainerFieldDefault in class X3DConcreteNode
  
  Returns:
  
  default containerField value
  
  See Also:
  
  X3D Scene Authoring Hints: containerField, X3D Unified Object Model (X3DUOM)
- initialize
  
  public final void initialize()
  
  Initialize all member variables to default values.
  
  Overrides:
  
  initialize in class X3DConcreteNode
- getGeoCoords
  
  public double[] getGeoCoords()
  Provide array of 3-tuple double results from inputOutput SFVec3d field named geoCoords.
  
  Tooltip: Defines absolute geographic location (and implicit local coordinate frame).
  
  Hint: X3D for Advanced Modeling (X3D4AM) slideset http://x3dgraphics.com/slidesets/X3dForAdvancedModeling/GeospatialComponentX3dEarth.pdf
  
  Warning: requires X3D profile='Full' or else include <component name='Geospatial' level='1'/>
  Specified by:
  
  getGeoCoords in interface GeoOrigin
  
  Returns:
  
  value of geoCoords field
- setGeoCoords
  
  public GeoOriginObject setGeoCoords(double[] newValue)
  Accessor method to assign 3-tuple double array to inputOutput SFVec3d field named geoCoords.
  
  Tooltip: Defines absolute geographic location (and implicit local coordinate frame).
  
  Hint: X3D for Advanced Modeling (X3D4AM) slideset http://x3dgraphics.com/slidesets/X3dForAdvancedModeling/GeospatialComponentX3dEarth.pdf
  
  Warning: requires X3D profile='Full' or else include <component name='Geospatial' level='1'/>
  Specified by:
  
  setGeoCoords in interface GeoOrigin
  
  Parameters:
  
  newValue - is new value for the geoCoords field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- setGeoCoords
  
  public GeoOriginObject setGeoCoords(SFVec3dObject newValue)
  
  Assign typed object value to SFVec3d geoCoords field, similar to setGeoCoords(double[]).
  
  Parameters:
  
  newValue - is new value for the geoCoords field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- setGeoCoords
  
  public GeoOriginObject setGeoCoords(double x, double y, double z)
  
  Assign values to SFVec3d geoCoords field, similar to setGeoCoords(double[]).
  
  Parameters:
  
  x - first component
  
  y - second component
  
  z - third component
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- getGeoSystem
  
  public java.lang.String[] getGeoSystem()
  Provide array of String results from initializeOnly MFString field named geoSystem.
  
  Tooltip: Identifies spatial reference frame: Geodetic (GD), Geocentric (GC), Universal Transverse Mercator (UTM). Supported values: "GD" "UTM" or "GC" followed by additional quoted string parameters as appropriate for the type.
  
  Hint: X3D Architecture 25.2.2 Spatial reference frames https://www.web3d.org/documents/specifications/19775-1/V3.3/Part01/components/geodata.html#Spatialreferenceframes
  
  Hint: X3D Architecture 25.2.4 Specifying geospatial coordinates https://www.web3d.org/documents/specifications/19775-1/V3.3/Part01/components/geodata.html#Specifyinggeospatialcoords
  
  Hint: UTM is Universal Transverse Mercator coordinate system https://en.wikipedia.org/wiki/Universal_Transverse_Mercator_coordinate_system
  
  Warning: deprecated values are GDC (replaced by GD) and GCC (replaced by GC).
  Specified by:
  
  getGeoSystem in interface GeoOrigin
  
  Returns:
  
  value of geoSystem field
- getGeoSystemList
  
  public java.util.ArrayList<java.lang.String> getGeoSystemList()
  
  Utility method to get ArrayList value of MFString geoSystem field, similar to getGeoSystem().
  
  Returns:
  
  value of geoSystem field
- getGeoSystemString
  
  public java.lang.String getGeoSystemString()
  
  Utility method to get String value of MFString geoSystem field, similar to getGeoSystem().
  
  Returns:
  
  value of geoSystem field
- setGeoSystem
  
  public GeoOriginObject setGeoSystem(java.lang.String[] newValue)
  Accessor method to assign String array to initializeOnly MFString field named geoSystem.
  
  Tooltip: Identifies spatial reference frame: Geodetic (GD), Geocentric (GC), Universal Transverse Mercator (UTM). Supported values: "GD" "UTM" or "GC" followed by additional quoted string parameters as appropriate for the type.
  
  Hint: X3D Architecture 25.2.2 Spatial reference frames https://www.web3d.org/documents/specifications/19775-1/V3.3/Part01/components/geodata.html#Spatialreferenceframes
  
  Hint: X3D Architecture 25.2.4 Specifying geospatial coordinates https://www.web3d.org/documents/specifications/19775-1/V3.3/Part01/components/geodata.html#Specifyinggeospatialcoords
  
  Hint: UTM is Universal Transverse Mercator coordinate system https://en.wikipedia.org/wiki/Universal_Transverse_Mercator_coordinate_system
  
  Warning: deprecated values are GDC (replaced by GD) and GCC (replaced by GC).
  Specified by:
  
  setGeoSystem in interface GeoOrigin
  
  Parameters:
  
  newValue - is new value for the geoSystem field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- setGeoSystem
  
  public GeoOriginObject setGeoSystem(MFStringObject newValue)
  
  Assign typed object value to MFString geoSystem field, similar to setGeoSystem(String[]).
  
  Parameters:
  
  newValue - is new value for the geoSystem field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- setGeoSystem
  
  public GeoOriginObject setGeoSystem(SFStringObject newValue)
  
  Assign single SFString object value to MFString geoSystem field, similar to setGeoSystem(String[]).
  
  Parameters:
  
  newValue - is new value for the geoSystem field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- setGeoSystem
  
  public GeoOriginObject setGeoSystem(java.lang.String newValue)
  
  Assign singleton String value to MFString geoSystem field, similar to setGeoSystem(String[]).
  
  Parameters:
  
  newValue - is new value for the geoSystem field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- setGeoSystem
  
  public GeoOriginObject setGeoSystem(java.util.ArrayList<java.lang.String> newValue)
  
  Assign ArrayList value of MFString geoSystem field, similar to setGeoSystem(String[]).
  
  Parameters:
  
  newValue - is new value for the geoSystem field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- clearGeoSystem
  
  public GeoOriginObject clearGeoSystem()
  
  Utility method to clear MFString value of geoSystem field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).
- addGeoSystem
  
  public GeoOriginObject addGeoSystem(java.lang.String newValue)
  
  Add singleton String value to MFString geoSystem field.
  
  Parameters:
  
  newValue - is new value to add to the geoSystem field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  
  See Also:
  
  MFStringObject.cleanupEnumerationValues(String)
- addGeoSystem
  
  public GeoOriginObject addGeoSystem(SFStringObject newValue)
  
  Add singleton SFStringObject value to MFString geoSystem field.
  
  Parameters:
  
  newValue - is new value to add to the geoSystem field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  
  See Also:
  
  MFStringObject.cleanupEnumerationValues(String)
- getIS
  
  public ISObject getIS()
  
  Provide ISObject instance (using a properly typed node) from inputOutput SFNode field IS.
  
  Specified by:
  
  getIS in class X3DConcreteNode
  
  Returns:
  
  value of IS field
  
  See Also:
  
  X3D Tooltips: IS, X3D Tooltips: connect
- setIS
  
  public GeoOriginObject setIS(ISObject newValue)
  
  Accessor method to assign ISObject instance (using a properly typed node) to inputOutput SFNode field IS.
  
  Specified by:
  
  setIS in class X3DConcreteNode
  
  Parameters:
  
  newValue - is new value for the IS field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  
  See Also:
  
  X3D Tooltips: IS, X3D Tooltips: connect
- clearIS
  
  public GeoOriginObject clearIS()
  
  Utility method to clear SFNode value of IS field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).
- hasIS
  
  public boolean hasIS()
  
  Indicate whether an object is available for inputOutput SFNode field IS.
  
  Returns:
  
  whether a concrete statement or CommentsBlock is available.
  
  See Also:
  
  getIS()
- getMetadata
  
  public X3DMetadataObject getMetadata()
  
  Provide X3DMetadataObject instance (using a properly typed node) from inputOutput SFNode field metadata.
  
  Specified by:
  
  getMetadata in interface GeoOrigin
  
  Specified by:
  
  getMetadata in interface X3DNode
  
  Returns:
  
  value of metadata field
  
  See Also:
  
  Tooltip: [X3DMetadataObject] Information about this node can be contained in a MetadataBoolean, MetadataDouble, MetadataFloat, MetadataInteger, MetadataString or MetadataSet node. Hint: X3D Architecture 7.2.4 Metadata https://www.web3d.org/documents/specifications/19775-1/V3.3/Part01/components/core.html#Metadata, X3D Scene Authoring Hints: Metadata Nodes
- setMetadata
  
  public GeoOriginObject setMetadata(X3DMetadataObject newValue)
  
  Accessor method to assign X3DMetadataObject instance (using a properly typed node) to inputOutput SFNode field metadata.
  
  Specified by:
  
  setMetadata in interface GeoOrigin
  
  Specified by:
  
  setMetadata in interface X3DNode
  
  Specified by:
  
  setMetadata in class X3DConcreteNode
  
  Parameters:
  
  newValue - is new value for the metadata field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  
  See Also:
  
  Tooltip: [X3DMetadataObject] Information about this node can be contained in a MetadataBoolean, MetadataDouble, MetadataFloat, MetadataInteger, MetadataString or MetadataSet node. Hint: X3D Architecture 7.2.4 Metadata https://www.web3d.org/documents/specifications/19775-1/V3.3/Part01/components/core.html#Metadata, X3D Scene Authoring Hints: Metadata Nodes
- clearMetadata
  
  public GeoOriginObject clearMetadata()
  
  Utility method to clear SFNode value of metadata field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).
- setMetadata
  
  public GeoOriginObject setMetadata(ProtoInstanceObject newValue)
  
  Assign ProtoInstance (using a properly typed node) to inputOutput SFNode field metadata.
  
  Specified by:
  
  setMetadata in class X3DConcreteNode
  
  Parameters:
  
  newValue - is new value for the metadata field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  
  See Also:
  
  setMetadata(X3DMetadataObject)
- hasMetadata
  
  public boolean hasMetadata()
  
  Indicate whether an object is available for inputOutput SFNode field metadata.
  
  Returns:
  
  whether a properly typed node or ProtoInstance or CommentsBlock is available.
  
  See Also:
  
  getMetadata(), getMetadataProtoInstance(), X3D Scene Authoring Hints: Metadata Nodes
- getRotateYUp
  
  public boolean getRotateYUp()
  
  Provide boolean value from initializeOnly SFBool field named rotateYUp.
  
  Tooltip: Whether to rotate coordinates of nodes using this GeoOrigin so that local-up direction aligns with VRML Y axis rotateYUp false means local up-direction is relative to planet surface rotateYUp true allows proper operation of NavigationInfo modes FLY, WALK. *
  
  Specified by:
  
  getRotateYUp in interface GeoOrigin
  
  Returns:
  
  value of rotateYUp field
- setRotateYUp
  
  public GeoOriginObject setRotateYUp(boolean newValue)
  
  Accessor method to assign boolean value to initializeOnly SFBool field named rotateYUp.
  
  Tooltip: Whether to rotate coordinates of nodes using this GeoOrigin so that local-up direction aligns with VRML Y axis rotateYUp false means local up-direction is relative to planet surface rotateYUp true allows proper operation of NavigationInfo modes FLY, WALK. *
  
  Specified by:
  
  setRotateYUp in interface GeoOrigin
  
  Parameters:
  
  newValue - is new value for the rotateYUp field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- setRotateYUp
  
  public GeoOriginObject setRotateYUp(SFBoolObject newValue)
  
  Assign typed object value to SFBool rotateYUp field, similar to setRotateYUp(boolean).
  
  Parameters:
  
  newValue - is new value for the rotateYUp field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- getDEF
  
  public java.lang.String getDEF()
  Provide String value from inputOutput SFString field named DEF.
  
  Tooltip: DEF defines a unique ID name for this node, referenceable by other nodes.
  
  Hint: descriptive DEF names improve clarity and help document a model.
  
  Hint: well-defined names can simplify design and debugging through improved author understanding.
  
  Hint: X3D Scene Authoring Hints, Naming Conventions https://www.web3d.org/x3d/content/examples/X3dSceneAuthoringHints.html#NamingConventions
  Overrides:
  
  getDEF in class X3DConcreteNode
  
  Returns:
  
  value of DEF field
  
  See Also:
  
  X3D Scene Authoring Hints: Naming Conventions
- setDEF
  
  public final GeoOriginObject setDEF(java.lang.String newValue)
  Accessor method to assign String value to inputOutput SFString field named DEF.
  
  Tooltip: DEF defines a unique ID name for this node, referenceable by other nodes.
  
  Hint: descriptive DEF names improve clarity and help document a model.
  
  Hint: well-defined names can simplify design and debugging through improved author understanding.
  
  Hint: X3D Scene Authoring Hints, Naming Conventions https://www.web3d.org/x3d/content/examples/X3dSceneAuthoringHints.html#NamingConventions
  
  Note that setting the DEF value clears the USE value.
  Specified by:
  
  setDEF in class X3DConcreteNode
  
  Parameters:
  
  newValue - is new value for the DEF field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- setDEF
  
  public GeoOriginObject setDEF(SFStringObject newValue)
  
  Assign typed object value to SFString DEF field, similar to setDEF(String).
  
  Parameters:
  
  newValue - is new value for the DEF field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- getUSE
  
  public java.lang.String getUSE()
  Provide String value from inputOutput SFString field named USE.
  
  Tooltip: USE means reuse an already DEF-ed node ID, excluding all child nodes and all other attributes (except for containerField, which can have a different value).
  
  Hint: USE references to previously defined DEF geometry (instead of duplicating nodes) can improve performance.
  
  Warning: do NOT include any child nodes, a DEF attribute, or any other attribute values (except for containerField) when defining a USE attribute.
  
  Warning: each USE value must match a corresponding DEF value that is defined earlier in the scene.
  Overrides:
  
  getUSE in class X3DConcreteNode
  
  Returns:
  
  value of USE field
  
  See Also:
  
  X3D Scene Authoring Hints: Naming Conventions
- setUSE
  
  public final GeoOriginObject setUSE(java.lang.String newValue)
  Accessor method to assign String value to inputOutput SFString field named USE.
  
  Tooltip: USE means reuse an already DEF-ed node ID, excluding all child nodes and all other attributes (except for containerField, which can have a different value).
  
  Hint: USE references to previously defined DEF geometry (instead of duplicating nodes) can improve performance.
  
  Warning: do NOT include any child nodes, a DEF attribute, or any other attribute values (except for containerField) when defining a USE attribute.
  
  Warning: each USE value must match a corresponding DEF value that is defined earlier in the scene.
  
  Note: each USE node is still an independent object, with the USE value matching the DEF value in the preceding object.
  
  Warning: invoking the setUSE() method on this node resets all other fields to their default values (except for containerField) and also releases all child nodes.
  
  Warning: no other operations can be performed to modify a USE node other than setting an alternate containerField value.
  Specified by:
  
  setUSE in class X3DConcreteNode
  
  Parameters:
  
  newValue - is new value for the USE field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- setUSE
  
  public GeoOriginObject setUSE(SFStringObject newValue)
  
  Assign typed object value to SFString USE field, similar to setUSE(String).
  
  Parameters:
  
  newValue - is new value for the USE field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- getCssClass
  
  public java.lang.String getCssClass()
  Provide String value from inputOutput SFString field named class.
  
  Tooltip: The class attribute is a space-separated list of classes, reserved for use by CSS cascading stylesheets.
  
  Warning: currently the class attribute is only supported in XML encoding of X3D scenes.
  
  Hint: W3C Cascading Style Sheets https://www.w3.org/Style/CSS
  Overrides:
  
  getCssClass in class X3DConcreteNode
  
  Returns:
  
  value of class field
  
  See Also:
  
  W3C Cascading Style Sheets
- setCssClass
  
  public final GeoOriginObject setCssClass(java.lang.String newValue)
  Accessor method to assign String value to inputOutput SFString field named class.
  
  Tooltip: The class attribute is a space-separated list of classes, reserved for use by CSS cascading stylesheets.
  
  Warning: currently the class attribute is only supported in XML encoding of X3D scenes.
  
  Hint: W3C Cascading Style Sheets https://www.w3.org/Style/CSS
  Specified by:
  
  setCssClass in class X3DConcreteNode
  
  Parameters:
  
  newValue - is new value for the class field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
  
  See Also:
  
  W3C Cascading Style Sheets
- setCssClass
  
  public GeoOriginObject setCssClass(SFStringObject newValue)
  
  Assign typed object value to SFString cssClass field, similar to setCssClass(String).
  
  Parameters:
  
  newValue - is new value for the class field.
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- setUSE
  
  public GeoOriginObject setUSE(GeoOriginObject DEFnode)
  
  Assign a USE reference to another DEF node of same node type, similar to setUSE(String).
  
  Warning: note that the setUSE() method on this node resets all other fields to their default values (except for containerField) and also releases all child nodes.
  
  Warning: no other operations can be performed to modify a USE node other than setting an alternate containerField value.
  
  Parameters:
  
  DEFnode - must have a DEF value defined
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
- addComments
  
  public GeoOriginObject addComments(java.lang.String newComment)
  
  Add comment as String to contained commentsList.
  
  Specified by:
  
  addComments in class X3DConcreteElement
  
  Parameters:
  
  newComment - initial value
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).
- addComments
  
  public GeoOriginObject addComments(java.lang.String[] newComments)
  
  Add comments as String[] array to contained commentsList.
  
  Specified by:
  
  addComments in class X3DConcreteElement
  
  Parameters:
  
  newComments - array of comments
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).
- addComments
  
  public GeoOriginObject addComments(CommentsBlock newCommentsBlock)
  
  Add CommentsBlock to contained commentsList.
  
  Specified by:
  
  addComments in class X3DConcreteElement
  
  Parameters:
  
  newCommentsBlock - block of comments to add
  
  Returns:
  
  GeoOriginObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).
- toStringX3D
  
  public java.lang.String toStringX3D(int indentLevel)
  
  Recursive method to provide X3D string serialization of this model subgraph, utilizing XML encoding and conforming to X3D Canonical Form.
  
  Specified by:
  
  toStringX3D in class X3DConcreteElement
  
  Parameters:
  
  indentLevel - number of levels of indentation for this element
  
  Returns:
  
  X3D string
  
  See Also:
  
  X3DObject.FILE_EXTENSION_X3D, X3DObject.FILE_EXTENSION_XML, X3DObject.toStringXML(), X3DObject.toFileXML(String), X3DObject.toFileX3D(String), X3D XML Encoding, X3D Compressed Binary Encoding: X3D Canonical Form, X3D Canonicalization (C14N) Tool
- toStringClassicVRML
  
  public java.lang.String toStringClassicVRML(int indentLevel)
  
  Recursive method to provide ClassicVRML string serialization.
  
  Specified by:
  
  toStringClassicVRML in class X3DConcreteElement
  
  Parameters:
  
  indentLevel - number of levels of indentation for this element
  
  Returns:
  
  ClassicVRML string
  
  See Also:
  
  X3DObject.FILE_EXTENSION_CLASSICVRML, X3D Resources: Virtual Reality Modeling Language (VRML) 97, Extensible 3D (X3D) encodings Part 2: Classic VRML encoding, Extensible 3D (X3D) encodings Part 2: Classic VRML encoding, Annex A: Grammar
- toStringVRML97
  
  public java.lang.String toStringVRML97(int indentLevel)
  
  Recursive method to provide VRML97 string serialization.
  
  Specified by:
  
  toStringVRML97 in class X3DConcreteElement
  
  Parameters:
  
  indentLevel - number of levels of indentation for this element
  
  Returns:
  
  VRML97 string
  
  See Also:
  
  X3DObject.FILE_EXTENSION_VRML97, X3D Resources: Virtual Reality Modeling Language (VRML) 97, Virtual Reality Modeling Language (VRML) 97 specification, VRML 97 v2.1 Amendment
- findElementByNameValue
  
  public X3DConcreteElement findElementByNameValue(java.lang.String nameValue)
  
  Recursive method to provide object reference to node or statement by name attribute, if found as part of this element or in a contained element. Elements with name fields include meta, Metadata* nodes, field/fieldValue, ProtoDeclare/ExternProtoDeclare/ProtoInstance, CAD and HAnim nodes.
  
  Warning: first start with findAncestorSceneObject() to check entire scene graph, or findAncestorX3DObject() to check entire model document.
  
  Warning: more than one element may be found that has the same name, this method does not handle that case.
  
  Specified by:
  
  findElementByNameValue in class X3DConcreteElement
  
  Parameters:
  
  nameValue - is value of the name field being searched for in this element and child elements(if any)
  
  Returns:
  
  object reference to found element, null otherwise
  
  See Also:
  
  findNodeByDEF(String), X3DConcreteElement.hasAncestorSceneObject(), X3DConcreteElement.findAncestorX3DObject()
- findElementByNameValue
  
  public X3DConcreteElement findElementByNameValue(java.lang.String nameValue, java.lang.String elementName)
  
  Recursive method to provide object reference to node or statement by name attribute, if found as part of this element or in a contained element. Elements with name fields include meta, Metadata* nodes, field/fieldValue, ProtoDeclare/ExternProtoDeclare/ProtoInstance, CAD and HAnim nodes.
  
  Warning: first start with findAncestorSceneObject() to check entire scene graph, or findAncestorX3DObject() to check entire model document.
  
  Warning: more than one element may be found that has the same name, this method does not handle that case.
  
  Specified by:
  
  findElementByNameValue in class X3DConcreteElement
  
  Parameters:
  
  nameValue - is value of the name field being searched for in this element and child elements(if any)
  
  elementName - identifies the element of interest (meta MetadataString ProtoDeclare CADassembly ProtoInstance HAnimHumanoid etc.)
  
  Returns:
  
  object reference to found element, null otherwise
  
  See Also:
  
  findNodeByDEF(String), X3DConcreteElement.hasAncestorSceneObject(), X3DConcreteElement.findAncestorX3DObject()
- hasElementByNameValue
  
  public boolean hasElementByNameValue(java.lang.String nameValue, java.lang.String elementName)
  
  Recursive method to determine whether node or statement with given name attribute is found, meaning both objects are attached to same scene graph.
  
  Parameters:
  
  nameValue - is value of the name field being searched for in this element and child elements(if any)
  
  elementName - identifies the element of interest (meta MetadataString ProtoDeclare CADassembly ProtoInstance HAnimHumanoid etc.)
  
  Returns:
  
  whether node is found
  
  See Also:
  
  findElementByNameValue(String, String)
- findNodeByDEF
  
  public X3DConcreteNode findNodeByDEF(java.lang.String DEFvalue)
  
  Recursive method to provide object reference to node by DEF, if found as this node or in a contained node.
  
  Warning: first start with findAncestorSceneObject() to check entire scene graph, or findAncestorX3DObject() to check entire model document.
  
  Warning: more than one element may be found that has the same DEF, this method does not handle that case.
  
  Specified by:
  
  findNodeByDEF in class X3DConcreteElement
  
  Parameters:
  
  DEFvalue - is value of the name field being searched for in this element and child elements(if any)
  
  Returns:
  
  object reference to found node, null otherwise
  
  See Also:
  
  findElementByNameValue(String), X3DConcreteElement.hasAncestorSceneObject(), X3DConcreteElement.findAncestorX3DObject()
- hasNodeByDEF
  
  public boolean hasNodeByDEF(java.lang.String DEFvalue)
  
  Recursive method to determine whether node with DEFvalue is found, meaning both objects are attached to same scene graph.
  
  Parameters:
  
  DEFvalue - is value of the name field being searched for in this element and child elements(if any)
  
  Returns:
  
  whether node is found
  
  See Also:
  
  findNodeByDEF(String)
- validate
  
  public java.lang.String validate()
  
  Recursive method to validate this element plus all contained nodes and statements, using both datatype-specification value checks and regular expression (regex) checking of corresponding string values.
  
  Specified by:
  
  validate in class X3DConcreteElement
  
  Returns:
  
  validation results (if any)

Class GeoOriginObject