Package org.web3d.x3d.jsail.Picking

Class PickableGroupObject

java.lang.Object
org.web3d.x3d.jsail.X3DConcreteElement
org.web3d.x3d.jsail.X3DConcreteNode
org.web3d.x3d.jsail.Picking.PickableGroupObject
All Implemented Interfaces:
X3DChildNode, X3DNode, X3DBoundedObject, X3DGroupingNode, PickableGroup, X3DPickableObject
public class PickableGroupObject
extends X3DConcreteNode
implements PickableGroup
PickableGroup is a Grouping node that can contain most nodes.

X3D node tooltip: (X3D version 3.2 or later) [X3DGroupingNode,X3DPickableObject,X3DVisibleObject] PickableGroup is a Grouping node that can contain most nodes. PickableGroup contains children that are marked as having a given classification of picking types, and can also enable or disable picking of the children.
  • Hint: insert a Shape node before adding geometry or Appearance.
  • Hint: content must be visible to be collidable and to be pickable.

Package hint: This org.web3d.x3d.jsail concrete class is used for implementing a standalone X3D object as a Plain Old Java Object (POJO). If you are writing Java code for use inside an X3D Script node, compile separate code using only the org.web3d.x3d.sai package instead.
See Also:
X3D Abstract Specification: PickableGroup, X3D Tooltips: PickableGroup, X3D Scene Authoring Hints

  • Field Details

  • Constructor Details

    • PickableGroupObject

      public PickableGroupObject()
      Constructor for PickableGroupObject to initialize member variables with default values.

    • PickableGroupObject

      public PickableGroupObject​(java.lang.String DEFlabel)
      Utility constructor that assigns DEF label after initializing member variables with default values.
      Parameters:
      DEFlabel - unique DEF name for this X3D node

  • Method Details

    • getElementName

      public final java.lang.String getElementName()
      Provides name of this element: PickableGroup
      Specified by:
      getElementName in class X3DConcreteElement
      Returns:
      name of this element

    • getComponent

      public final java.lang.String getComponent()
      Defines X3D component for the PickableGroup element: Picking
      Specified by:
      getComponent in class X3DConcreteElement
      Returns:
      X3D component for this element

    • getComponentLevel

      public final int getComponentLevel()
      Provides default X3D component level for this element: 1
      Specified by:
      getComponentLevel in class X3DConcreteElement
      Returns:
      default X3D component level for this element

    • getFieldType

      public java.lang.String getFieldType​(java.lang.String fieldName)
      Indicate type corresponding to given fieldName.
      Specified by:
      getFieldType in class X3DConcreteElement
      Parameters:
      fieldName - name of field in this X3D node
      Returns:
      X3D type (SFvec3f etc.), otherwise ConfigurationProperties.ERROR_UNKNOWN_FIELD_TYPE if not recognized
      See Also:
      ConfigurationProperties.ERROR_UNKNOWN_FIELD_TYPE

    • getAccessType

      public java.lang.String getAccessType​(java.lang.String fieldName)
      Indicate accessType corresponding to given fieldName.
      Specified by:
      getAccessType in class X3DConcreteElement
      Parameters:
      fieldName - name of field in this X3D node
      Returns:
      X3D accessType (inputOnly etc.), otherwise ConfigurationProperties.ERROR_UNKNOWN_FIELD_ACCESSTYPE if not recognized
      See Also:
      ConfigurationProperties.ERROR_UNKNOWN_FIELD_ACCESSTYPE

    • getContainerFieldDefault

      public final java.lang.String getContainerFieldDefault()
      containerField describes typical field relationship of a node to its parent. Usage is not ordinarily needed when using this API, default value is provided for informational purposes.
      Specified by:
      getContainerFieldDefault in class X3DConcreteNode
      Returns:
      default containerField value
      See Also:
      X3D Scene Authoring Hints: containerField, X3D Unified Object Model (X3DUOM)

    • initialize

      public final void initialize()
      Initialize all member variables to default values.
      Overrides:
      initialize in class X3DConcreteNode

    • getBboxCenter

      public float[] getBboxCenter()
      Provide array of 3-tuple float results from initializeOnly SFVec3f field named bboxCenter.

      Tooltip: Bounding box center accompanies bboxSize and provides an optional hint for bounding box position offset from origin of local coordinate system.
      Specified by:
      getBboxCenter in interface PickableGroup
      Specified by:
      getBboxCenter in interface X3DBoundedObject
      Specified by:
      getBboxCenter in interface X3DGroupingNode
      Returns:
      value of bboxCenter field

    • setBboxCenter

      public PickableGroupObject setBboxCenter​(float[] newValue)
      Accessor method to assign 3-tuple float array to initializeOnly SFVec3f field named bboxCenter.

      Tooltip: Bounding box center accompanies bboxSize and provides an optional hint for bounding box position offset from origin of local coordinate system.
      Specified by:
      setBboxCenter in interface PickableGroup
      Specified by:
      setBboxCenter in interface X3DBoundedObject
      Specified by:
      setBboxCenter in interface X3DGroupingNode
      Parameters:
      newValue - is new value for the bboxCenter field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setBboxCenter

      public PickableGroupObject setBboxCenter​(SFVec3fObject newValue)
      Assign typed object value to SFVec3f bboxCenter field, similar to setBboxCenter(float[]).
      Parameters:
      newValue - is new value for the bboxCenter field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setBboxCenter

      public PickableGroupObject setBboxCenter​(float x, float y, float z)
      Assign values to SFVec3f bboxCenter field, similar to setBboxCenter(float[]).
      Parameters:
      x - first component
      y - second component
      z - third component
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setBboxCenter

      public PickableGroupObject setBboxCenter​(double x, double y, double z)
      Utility method: double-precision set-parameters accessor for X3D floating-point type, similar to setBboxCenter(float[]).
      Parameters:
      x - first component
      y - second component
      z - third component
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setBboxCenter

      public PickableGroupObject setBboxCenter​(double[] newArray)
      Utility method: double-precision set-array accessor for X3D floating-point type, similar to setBboxCenter(float[]).
      Parameters:
      newArray - is new value for field
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • getBboxDisplay

      public boolean getBboxDisplay()
      Provide boolean value from inputOutput SFBool field named bboxDisplay.

      Tooltip: Whether to display bounding box for associated geometry, aligned with world coordinates.
      • Hint: the bounding box is displayed regardless of whether contained content is visible.
      Specified by:
      getBboxDisplay in interface PickableGroup
      Specified by:
      getBboxDisplay in interface X3DBoundedObject
      Specified by:
      getBboxDisplay in interface X3DGroupingNode
      Returns:
      value of bboxDisplay field

    • setBboxDisplay

      public PickableGroupObject setBboxDisplay​(boolean newValue)
      Accessor method to assign boolean value to inputOutput SFBool field named bboxDisplay.

      Tooltip: Whether to display bounding box for associated geometry, aligned with world coordinates.
      • Hint: the bounding box is displayed regardless of whether contained content is visible.
      Specified by:
      setBboxDisplay in interface PickableGroup
      Specified by:
      setBboxDisplay in interface X3DBoundedObject
      Specified by:
      setBboxDisplay in interface X3DGroupingNode
      Parameters:
      newValue - is new value for the bboxDisplay field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setBboxDisplay

      public PickableGroupObject setBboxDisplay​(SFBoolObject newValue)
      Assign typed object value to SFBool bboxDisplay field, similar to setBboxDisplay(boolean).
      Parameters:
      newValue - is new value for the bboxDisplay field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • getBboxSize

      public float[] getBboxSize()
      Provide array of 3-tuple float results within allowed range of [0,infinity), or default value [-1 -1 -1], from initializeOnly SFVec3f field named bboxSize.

      Tooltip: Bounding box size is usually omitted, and can easily be calculated automatically by an X3D player at scene-loading time with minimal computational cost. Bounding box size can also be defined as an optional authoring hint that suggests an optimization or constraint.
      Specified by:
      getBboxSize in interface PickableGroup
      Specified by:
      getBboxSize in interface X3DBoundedObject
      Specified by:
      getBboxSize in interface X3DGroupingNode
      Returns:
      value of bboxSize field

    • setBboxSize

      public PickableGroupObject setBboxSize​(float[] newValue)
      Accessor method to assign 3-tuple float array to initializeOnly SFVec3f field named bboxSize.

      Tooltip: Bounding box size is usually omitted, and can easily be calculated automatically by an X3D player at scene-loading time with minimal computational cost. Bounding box size can also be defined as an optional authoring hint that suggests an optimization or constraint.
      Specified by:
      setBboxSize in interface PickableGroup
      Specified by:
      setBboxSize in interface X3DBoundedObject
      Specified by:
      setBboxSize in interface X3DGroupingNode
      Parameters:
      newValue - is new value for the bboxSize field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setBboxSize

      public PickableGroupObject setBboxSize​(SFVec3fObject newValue)
      Assign typed object value to SFVec3f bboxSize field, similar to setBboxSize(float[]).
      Parameters:
      newValue - is new value for the bboxSize field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setBboxSize

      public PickableGroupObject setBboxSize​(float x, float y, float z)
      Assign values to SFVec3f bboxSize field, similar to setBboxSize(float[]).
      Parameters:
      x - first component
      y - second component
      z - third component
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setBboxSize

      public PickableGroupObject setBboxSize​(double x, double y, double z)
      Utility method: double-precision set-parameters accessor for X3D floating-point type, similar to setBboxSize(float[]).
      Parameters:
      x - first component
      y - second component
      z - third component
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setBboxSize

      public PickableGroupObject setBboxSize​(double[] newArray)
      Utility method: double-precision set-array accessor for X3D floating-point type, similar to setBboxSize(float[]).
      Parameters:
      newArray - is new value for field
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • getChildren

      public X3DNode[] getChildren()
      Provide array of X3DChildNode results (using an array consisting of properly typed nodes or ProtoInstanceObjects) from inputOutput MFNode field children.

      Tooltip: [X3DChildNode] Grouping nodes contain an ordered list of children nodes.
      • Hint: Each grouping node defines a coordinate space for its children, relative to the coordinate space of its parent node. Thus transformations accumulate down the scene graph hierarchy.
      • Hint: inputOnly MFNode addChildren field can append new X3DChildNode nodes via a ROUTE connection, duplicate input nodes (i.e. matching DEF, USE values) are ignored.
      • Hint: inputOnly MFNode removeChildren field can remove nodes from the children list, unrecognized input nodes (i.e. nonmatching DEF, USE values) are ignored.
      • Hint: X3D Architecture 10.2.1 Grouping and children node types, https://www.web3d.org/documents/specifications/19775-1/V3.3/Part01/components/group.html#GroupingAndChildrenNodes


      Warning: according to X3D Unified Object Model (X3DUOM), acceptable node types are limited to X3DChildNode.
      Specified by:
      getChildren in interface PickableGroup
      Specified by:
      getChildren in interface X3DGroupingNode
      Returns:
      value of children field
      See Also:
      X3DChildNode

    • getChildrenList

      public java.util.ArrayList<X3DNode> getChildrenList()
      Utility method to get ArrayList value of MFNode children field, similar to getChildren().
      Returns:
      value of children field

    • setChildren

      public PickableGroupObject setChildren​(X3DNode[] newValue)
      Accessor method to assign X3DChildNode array (using an array consisting of properly typed nodes or ProtoInstanceObjects) to inputOutput MFNode field children.

      Tooltip: [X3DChildNode] Grouping nodes contain an ordered list of children nodes.
      • Hint: Each grouping node defines a coordinate space for its children, relative to the coordinate space of its parent node. Thus transformations accumulate down the scene graph hierarchy.
      • Hint: inputOnly MFNode addChildren field can append new X3DChildNode nodes via a ROUTE connection, duplicate input nodes (i.e. matching DEF, USE values) are ignored.
      • Hint: inputOnly MFNode removeChildren field can remove nodes from the children list, unrecognized input nodes (i.e. nonmatching DEF, USE values) are ignored.
      • Hint: X3D Architecture 10.2.1 Grouping and children node types, https://www.web3d.org/documents/specifications/19775-1/V3.3/Part01/components/group.html#GroupingAndChildrenNodes


      Note: according to X3D Unified Object Model (X3DUOM), acceptable node types are limited to X3DChildNode.
      Specified by:
      setChildren in interface PickableGroup
      Specified by:
      setChildren in interface X3DGroupingNode
      Parameters:
      newValue - is new value for the children field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setChildren

      public PickableGroupObject setChildren​(java.util.ArrayList<X3DChildNode> newValue)
      Assign ArrayList value of MFNode children field, similar to setChildren(X3DNode[]).
      Parameters:
      newValue - is new value for the children field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • addChildren

      public void addChildren​(X3DNode newValue)
      Add single node to existing array of children nodes (if any).

      Note: according to X3D Unified Object Model (X3DUOM), acceptable node types are limited to X3DChildNode and ProtoInstance.
      Parameters:
      newValue - is new value to be appended the children field.

    • addChildren

      public PickableGroupObject addChildren​(ProtoInstanceObject newValue)
      Add single ProtoInstanceObject (with appropriate node type and containerField value) to MFNode array for children field.

      Note: according to X3D Unified Object Model (X3DUOM), acceptable node types are limited to ShaderPart and ProtoInstance.
      Parameters:
      newValue - is new value to be appended the parts field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • addChild

      public PickableGroupObject addChild​(X3DChildNode newValue)
      Utility method to add single child element to contained list of existing children nodes (if any).
      Parameters:
      newValue - is new node value to be appended the children field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • addChildren

      public void addChildren​(X3DNode[] newValue)
      Add array of children nodes to array of existing nodes (if any).

      Note: according to X3D Unified Object Model (X3DUOM), acceptable node types are limited to X3DChildNode.
      Specified by:
      addChildren in interface PickableGroup
      Specified by:
      addChildren in interface X3DGroupingNode
      Parameters:
      newValue - is new value array to be appended the children field.

    • setChildren

      public void setChildren​(X3DNode newValue)
      Set single children node, replacing prior array of existing nodes (if any).

      Note: according to X3D Unified Object Model (X3DUOM), acceptable node types are restricted to X3DChildNode.
      Specified by:
      setChildren in interface PickableGroup
      Specified by:
      setChildren in interface X3DGroupingNode
      Parameters:
      newValue - is new node for the children field (restricted to X3DChildNode)

    • clearChildren

      public PickableGroupObject clearChildren()
      Utility method to clear MFNode value of children field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).

    • hasChildren

      public boolean hasChildren()
      Indicate whether an object is available for inputOutput MFNode field children.
      Returns:
      whether a properly typed node or ProtoInstance array or CommentsBlock is available.
      See Also:
      getChildren()

    • addComments

      public PickableGroupObject addComments​(java.lang.String newComment)
      Add comment as CommentsBlock to children field
      Specified by:
      addComments in class X3DConcreteElement
      Parameters:
      newComment - initial value
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).

    • addComments

      public PickableGroupObject addComments​(java.lang.String[] newComments)
      Add comments as String[] array to children field
      Specified by:
      addComments in class X3DConcreteElement
      Parameters:
      newComments - array of comments
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).

    • addComments

      public PickableGroupObject addComments​(CommentsBlock newCommentsBlock)
      Add CommentsBlock to children field
      Specified by:
      addComments in class X3DConcreteElement
      Parameters:
      newCommentsBlock - block of comments to add
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • getIS

      public ISObject getIS()
      Provide ISObject instance (using a properly typed node) from inputOutput SFNode field IS.
      Specified by:
      getIS in class X3DConcreteNode
      Returns:
      value of IS field
      See Also:
      X3D Tooltips: IS, X3D Tooltips: connect

    • setIS

      public PickableGroupObject setIS​(ISObject newValue)
      Accessor method to assign ISObject instance (using a properly typed node) to inputOutput SFNode field IS.
      Specified by:
      setIS in class X3DConcreteNode
      Parameters:
      newValue - is new value for the IS field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
      See Also:
      X3D Tooltips: IS, X3D Tooltips: connect

    • clearIS

      public PickableGroupObject clearIS()
      Utility method to clear SFNode value of IS field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).

    • hasIS

      public boolean hasIS()
      Indicate whether an object is available for inputOutput SFNode field IS.
      Returns:
      whether a concrete statement or CommentsBlock is available.
      See Also:
      getIS()

    • getMetadata

      public X3DMetadataObject getMetadata()
      Provide X3DMetadataObject instance (using a properly typed node) from inputOutput SFNode field metadata.
      Specified by:
      getMetadata in interface PickableGroup
      Specified by:
      getMetadata in interface X3DChildNode
      Specified by:
      getMetadata in interface X3DGroupingNode
      Specified by:
      getMetadata in interface X3DNode
      Returns:
      value of metadata field
      See Also:
      Tooltip: [X3DMetadataObject] Information about this node can be contained in a MetadataBoolean, MetadataDouble, MetadataFloat, MetadataInteger, MetadataString or MetadataSet node. Hint: X3D Architecture 7.2.4 Metadata https://www.web3d.org/documents/specifications/19775-1/V3.3/Part01/components/core.html#Metadata , X3D Scene Authoring Hints: Metadata Nodes

    • setMetadata

      public PickableGroupObject setMetadata​(X3DMetadataObject newValue)
      Accessor method to assign X3DMetadataObject instance (using a properly typed node) to inputOutput SFNode field metadata.
      Specified by:
      setMetadata in interface PickableGroup
      Specified by:
      setMetadata in interface X3DChildNode
      Specified by:
      setMetadata in interface X3DGroupingNode
      Specified by:
      setMetadata in interface X3DNode
      Specified by:
      setMetadata in class X3DConcreteNode
      Parameters:
      newValue - is new value for the metadata field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
      See Also:
      Tooltip: [X3DMetadataObject] Information about this node can be contained in a MetadataBoolean, MetadataDouble, MetadataFloat, MetadataInteger, MetadataString or MetadataSet node. Hint: X3D Architecture 7.2.4 Metadata https://www.web3d.org/documents/specifications/19775-1/V3.3/Part01/components/core.html#Metadata , X3D Scene Authoring Hints: Metadata Nodes

    • clearMetadata

      public PickableGroupObject clearMetadata()
      Utility method to clear SFNode value of metadata field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).

    • setMetadata

      public PickableGroupObject setMetadata​(ProtoInstanceObject newValue)
      Assign ProtoInstance (using a properly typed node) to inputOutput SFNode field metadata.
      Specified by:
      setMetadata in class X3DConcreteNode
      Parameters:
      newValue - is new value for the metadata field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
      See Also:
      setMetadata(X3DMetadataObject)

    • hasMetadata

      public boolean hasMetadata()
      Indicate whether an object is available for inputOutput SFNode field metadata.
      Returns:
      whether a properly typed node or ProtoInstance or CommentsBlock is available.
      See Also:
      getMetadata(), getMetadataProtoInstance(), X3D Scene Authoring Hints: Metadata Nodes

    • getObjectType

      public java.lang.String[] getObjectType()
      Provide array of String enumeration results with quoted value(s) ["ALL","NONE","TERRAIN",...] from inputOutput MFString field named objectType.

      Tooltip: The objectType field specifies a set of labels used in the picking process. Each string specified is treated as an independent label that needs to be matched against the same type in one of the pick sensor instances. Example: labeling a PickableGroup with the objectType value "WATER" and then attempting to intersect a pick sensor with objectType value "GROUND" fails since the objectType values do not match. Example: the special value "ALL" means that each node is available for picking regardless of the type specified by the pick sensor. Example: the special value "NONE" effectively disables all picking for this node and is the equivalent of setting the pickable field to false.
      • Hint: authors may define any value for objectType.
      • Hint: MFString arrays can have multiple values, so "separate each individual string" "by using quote marks".


      Available enumeration values for string comparison: ALL, NONE, TERRAIN.
      Specified by:
      getObjectType in interface PickableGroup
      Returns:
      value of objectType field

    • getObjectTypeList

      public java.util.ArrayList<java.lang.String> getObjectTypeList()
      Utility method to get ArrayList value of MFString objectType field, similar to getObjectType().
      Returns:
      value of objectType field

    • getObjectTypeString

      public java.lang.String getObjectTypeString()
      Utility method to get String value of MFString objectType field, similar to getObjectType().
      Returns:
      value of objectType field

    • setObjectType

      public PickableGroupObject setObjectType​(java.lang.String[] newValue)
      Accessor method to assign String enumeration array (""ALL"" | ""NONE"" | ""TERRAIN"") to inputOutput MFString field named objectType.

      Hint: authors have option to choose from an extendible list of predefined enumeration values (ALL, NONE, TERRAIN).

      Tooltip: The objectType field specifies a set of labels used in the picking process. Each string specified is treated as an independent label that needs to be matched against the same type in one of the pick sensor instances. Example: labeling a PickableGroup with the objectType value "WATER" and then attempting to intersect a pick sensor with objectType value "GROUND" fails since the objectType values do not match. Example: the special value "ALL" means that each node is available for picking regardless of the type specified by the pick sensor. Example: the special value "NONE" effectively disables all picking for this node and is the equivalent of setting the pickable field to false.
      • Hint: authors may define any value for objectType.
      • Hint: MFString arrays can have multiple values, so "separate each individual string" "by using quote marks".
      Specified by:
      setObjectType in interface PickableGroup
      Parameters:
      newValue - is new value for the objectType field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setObjectType

      public PickableGroupObject setObjectType​(MFStringObject newValue)
      Assign typed object value to MFString objectType field, similar to setObjectType(String[]).
      Parameters:
      newValue - is new value for the objectType field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setObjectType

      public PickableGroupObject setObjectType​(SFStringObject newValue)
      Assign single SFString object value to MFString objectType field, similar to setObjectType(String[]).
      Parameters:
      newValue - is new value for the objectType field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
      See Also:
      MFStringObject.cleanupEnumerationValues(String)

    • setObjectType

      public PickableGroupObject setObjectType​(java.lang.String newValue)
      Assign singleton String value to MFString objectType field, similar to setObjectType(String[]).
      Parameters:
      newValue - is new value for the objectType field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
      See Also:
      MFStringObject.cleanupEnumerationValues(String)

    • setObjectType

      public PickableGroupObject setObjectType​(java.util.ArrayList<java.lang.String> newValue)
      Assign ArrayList value of MFString objectType field, similar to setObjectType(String[]).
      Parameters:
      newValue - is new value for the objectType field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • clearObjectType

      public PickableGroupObject clearObjectType()
      Utility method to clear MFString value of objectType field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive setAttribute method invocations).

    • addObjectType

      public PickableGroupObject addObjectType​(java.lang.String newValue)
      Add singleton String value to MFString objectType field.
      Parameters:
      newValue - is new value to add to the objectType field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
      See Also:
      MFStringObject.cleanupEnumerationValues(String)

    • addObjectType

      public PickableGroupObject addObjectType​(SFStringObject newValue)
      Add singleton SFStringObject value to MFString objectType field.
      Parameters:
      newValue - is new value to add to the objectType field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
      See Also:
      MFStringObject.cleanupEnumerationValues(String)

    • getPickable

      public boolean getPickable()
      Provide boolean value from inputOutput SFBool field named pickable.

      Tooltip: The pickable field determines whether pick traversal is performed on this node or its children.
      • Hint: pickable only affects children accessed through the transformation hierarchy of the parent.
      • Warning: if one or more of the children of this instance is accessible through another transformation hierarchy through DEF/USE that still has picking enabled, they are still pickable through that path only.
      Specified by:
      getPickable in interface PickableGroup
      Specified by:
      getPickable in interface X3DPickableObject
      Returns:
      value of pickable field

    • setPickable

      public PickableGroupObject setPickable​(boolean newValue)
      Accessor method to assign boolean value to inputOutput SFBool field named pickable.

      Tooltip: The pickable field determines whether pick traversal is performed on this node or its children.
      • Hint: pickable only affects children accessed through the transformation hierarchy of the parent.
      • Warning: if one or more of the children of this instance is accessible through another transformation hierarchy through DEF/USE that still has picking enabled, they are still pickable through that path only.
      Specified by:
      setPickable in interface PickableGroup
      Specified by:
      setPickable in interface X3DPickableObject
      Parameters:
      newValue - is new value for the pickable field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setPickable

      public PickableGroupObject setPickable​(SFBoolObject newValue)
      Assign typed object value to SFBool pickable field, similar to setPickable(boolean).
      Parameters:
      newValue - is new value for the pickable field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • getVisible

      public boolean getVisible()
      Provide boolean value from inputOutput SFBool field named visible.

      Tooltip: Whether or not renderable content within this node is visually displayed.
      • Hint: the visible field has no effect on animation behaviors, event passing or other non-visual characteristics.
      • Hint: content must be visible to be collidable and to be pickable.
      Specified by:
      getVisible in interface PickableGroup
      Specified by:
      getVisible in interface X3DBoundedObject
      Specified by:
      getVisible in interface X3DGroupingNode
      Returns:
      value of visible field

    • setVisible

      public PickableGroupObject setVisible​(boolean newValue)
      Accessor method to assign boolean value to inputOutput SFBool field named visible.

      Tooltip: Whether or not renderable content within this node is visually displayed.
      • Hint: the visible field has no effect on animation behaviors, event passing or other non-visual characteristics.
      • Hint: content must be visible to be collidable and to be pickable.
      Specified by:
      setVisible in interface PickableGroup
      Specified by:
      setVisible in interface X3DBoundedObject
      Specified by:
      setVisible in interface X3DGroupingNode
      Parameters:
      newValue - is new value for the visible field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setVisible

      public PickableGroupObject setVisible​(SFBoolObject newValue)
      Assign typed object value to SFBool visible field, similar to setVisible(boolean).
      Parameters:
      newValue - is new value for the visible field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • getDEF

      public java.lang.String getDEF()
      Provide String value from inputOutput SFString field named DEF.

      Tooltip: DEF defines a unique ID name for this node, referenceable by other nodes.
      Overrides:
      getDEF in class X3DConcreteNode
      Returns:
      value of DEF field
      See Also:
      X3D Scene Authoring Hints: Naming Conventions

    • setDEF

      public final PickableGroupObject setDEF​(java.lang.String newValue)
      Accessor method to assign String value to inputOutput SFString field named DEF.

      Tooltip: DEF defines a unique ID name for this node, referenceable by other nodes.

      Note that setting the DEF value clears the USE value.
      Specified by:
      setDEF in class X3DConcreteNode
      Parameters:
      newValue - is new value for the DEF field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setDEF

      public PickableGroupObject setDEF​(SFStringObject newValue)
      Assign typed object value to SFString DEF field, similar to setDEF(String).
      Parameters:
      newValue - is new value for the DEF field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • getUSE

      public java.lang.String getUSE()
      Provide String value from inputOutput SFString field named USE.

      Tooltip: USE means reuse an already DEF-ed node ID, excluding all child nodes and all other attributes (except for containerField, which can have a different value).
      • Hint: USE references to previously defined DEF geometry (instead of duplicating nodes) can improve performance.
      • Warning: do NOT include any child nodes, a DEF attribute, or any other attribute values (except for containerField) when defining a USE attribute.
      • Warning: each USE value must match a corresponding DEF value that is defined earlier in the scene.
      Overrides:
      getUSE in class X3DConcreteNode
      Returns:
      value of USE field
      See Also:
      X3D Scene Authoring Hints: Naming Conventions

    • setUSE

      public final PickableGroupObject setUSE​(java.lang.String newValue)
      Accessor method to assign String value to inputOutput SFString field named USE.

      Tooltip: USE means reuse an already DEF-ed node ID, excluding all child nodes and all other attributes (except for containerField, which can have a different value).
      • Hint: USE references to previously defined DEF geometry (instead of duplicating nodes) can improve performance.
      • Warning: do NOT include any child nodes, a DEF attribute, or any other attribute values (except for containerField) when defining a USE attribute.
      • Warning: each USE value must match a corresponding DEF value that is defined earlier in the scene.


      Note: each USE node is still an independent object, with the USE value matching the DEF value in the preceding object.

      Warning: invoking the setUSE() method on this node resets all other fields to their default values (except for containerField) and also releases all child nodes.

      Warning: no other operations can be performed to modify a USE node other than setting an alternate containerField value.
      Specified by:
      setUSE in class X3DConcreteNode
      Parameters:
      newValue - is new value for the USE field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setUSE

      public PickableGroupObject setUSE​(SFStringObject newValue)
      Assign typed object value to SFString USE field, similar to setUSE(String).
      Parameters:
      newValue - is new value for the USE field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • getCssClass

      public java.lang.String getCssClass()
      Provide String value from inputOutput SFString field named class.

      Tooltip: The class attribute is a space-separated list of classes, reserved for use by CSS cascading stylesheets.
      • Warning: currently the class attribute is only supported in XML encoding of X3D scenes.
      • Hint: W3C Cascading Style Sheets https://www.w3.org/Style/CSS
      Overrides:
      getCssClass in class X3DConcreteNode
      Returns:
      value of class field
      See Also:
      W3C Cascading Style Sheets

    • setCssClass

      public final PickableGroupObject setCssClass​(java.lang.String newValue)
      Accessor method to assign String value to inputOutput SFString field named class.

      Tooltip: The class attribute is a space-separated list of classes, reserved for use by CSS cascading stylesheets.
      • Warning: currently the class attribute is only supported in XML encoding of X3D scenes.
      • Hint: W3C Cascading Style Sheets https://www.w3.org/Style/CSS
      Specified by:
      setCssClass in class X3DConcreteNode
      Parameters:
      newValue - is new value for the class field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).
      See Also:
      W3C Cascading Style Sheets

    • setCssClass

      public PickableGroupObject setCssClass​(SFStringObject newValue)
      Assign typed object value to SFString cssClass field, similar to setCssClass(String).
      Parameters:
      newValue - is new value for the class field.
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • setUSE

      public PickableGroupObject setUSE​(PickableGroupObject DEFnode)
      Assign a USE reference to another DEF node of same node type, similar to setUSE(String).

      Warning: note that the setUSE() method on this node resets all other fields to their default values (except for containerField) and also releases all child nodes.

      Warning: no other operations can be performed to modify a USE node other than setting an alternate containerField value.
      Parameters:
      DEFnode - must have a DEF value defined
      Returns:
      PickableGroupObject - namely this same object to allow sequential method pipelining (i.e. consecutive method invocations on the same object).

    • toStringX3D

      public java.lang.String toStringX3D​(int indentLevel)
      Recursive method to provide X3D string serialization of this model subgraph, utilizing XML encoding and conforming to X3D Canonical Form.
      Specified by:
      toStringX3D in class X3DConcreteElement
      Parameters:
      indentLevel - number of levels of indentation for this element
      Returns:
      X3D string
      See Also:
      X3DObject.FILE_EXTENSION_X3D, X3DObject.FILE_EXTENSION_XML, X3DObject.toStringXML(), X3DObject.toFileXML(String), X3DObject.toFileX3D(String), X3D XML Encoding, X3D Compressed Binary Encoding: X3D Canonical Form, X3D Canonicalization (C14N) Tool

    • toStringClassicVRML

      public java.lang.String toStringClassicVRML​(int indentLevel)
      Recursive method to provide ClassicVRML string serialization.
      Specified by:
      toStringClassicVRML in class X3DConcreteElement
      Parameters:
      indentLevel - number of levels of indentation for this element
      Returns:
      ClassicVRML string
      See Also:
      X3DObject.FILE_EXTENSION_CLASSICVRML, X3D Resources: Virtual Reality Modeling Language (VRML) 97, Extensible 3D (X3D) encodings Part 2: Classic VRML encoding, Extensible 3D (X3D) encodings Part 2: Classic VRML encoding, Annex A: Grammar

    • toStringVRML97

      public java.lang.String toStringVRML97​(int indentLevel)
      Recursive method to provide VRML97 string serialization.
      Specified by:
      toStringVRML97 in class X3DConcreteElement
      Parameters:
      indentLevel - number of levels of indentation for this element
      Returns:
      VRML97 string
      See Also:
      X3DObject.FILE_EXTENSION_VRML97, X3D Resources: Virtual Reality Modeling Language (VRML) 97, Virtual Reality Modeling Language (VRML) 97 specification, VRML 97 v2.1 Amendment

    • findElementByNameValue

      public X3DConcreteElement findElementByNameValue​(java.lang.String nameValue)
      Recursive method to provide object reference to node or statement by name attribute, if found as part of this element or in a contained element. Elements with name fields include meta, Metadata* nodes, field/fieldValue, ProtoDeclare/ExternProtoDeclare/ProtoInstance, CAD and HAnim nodes.

      Warning: first start with findAncestorSceneObject() to check entire scene graph, or findAncestorX3DObject() to check entire model document.

      Warning: more than one element may be found that has the same name, this method does not handle that case.
      Specified by:
      findElementByNameValue in class X3DConcreteElement
      Parameters:
      nameValue - is value of the name field being searched for in this element and child elements(if any)
      Returns:
      object reference to found element, null otherwise
      See Also:
      findNodeByDEF(String), X3DConcreteElement.hasAncestorSceneObject(), X3DConcreteElement.findAncestorX3DObject()

    • findElementByNameValue

      public X3DConcreteElement findElementByNameValue​(java.lang.String nameValue, java.lang.String elementName)
      Recursive method to provide object reference to node or statement by name attribute, if found as part of this element or in a contained element. Elements with name fields include meta, Metadata* nodes, field/fieldValue, ProtoDeclare/ExternProtoDeclare/ProtoInstance, CAD and HAnim nodes.

      Warning: first start with findAncestorSceneObject() to check entire scene graph, or findAncestorX3DObject() to check entire model document.

      Warning: more than one element may be found that has the same name, this method does not handle that case.
      Specified by:
      findElementByNameValue in class X3DConcreteElement
      Parameters:
      nameValue - is value of the name field being searched for in this element and child elements(if any)
      elementName - identifies the element of interest (meta MetadataString ProtoDeclare CADassembly ProtoInstance HAnimHumanoid etc.)
      Returns:
      object reference to found element, null otherwise
      See Also:
      findNodeByDEF(String), X3DConcreteElement.hasAncestorSceneObject(), X3DConcreteElement.findAncestorX3DObject()

    • hasElementByNameValue

      public boolean hasElementByNameValue​(java.lang.String nameValue, java.lang.String elementName)
      Recursive method to determine whether node or statement with given name attribute is found, meaning both objects are attached to same scene graph.
      Parameters:
      nameValue - is value of the name field being searched for in this element and child elements(if any)
      elementName - identifies the element of interest (meta MetadataString ProtoDeclare CADassembly ProtoInstance HAnimHumanoid etc.)
      Returns:
      whether node is found
      See Also:
      findElementByNameValue(String, String)

    • findNodeByDEF

      public X3DConcreteNode findNodeByDEF​(java.lang.String DEFvalue)
      Recursive method to provide object reference to node by DEF, if found as this node or in a contained node.

      Warning: first start with findAncestorSceneObject() to check entire scene graph, or findAncestorX3DObject() to check entire model document.

      Warning: more than one element may be found that has the same DEF, this method does not handle that case.
      Specified by:
      findNodeByDEF in class X3DConcreteElement
      Parameters:
      DEFvalue - is value of the name field being searched for in this element and child elements(if any)
      Returns:
      object reference to found node, null otherwise
      See Also:
      findElementByNameValue(String), X3DConcreteElement.hasAncestorSceneObject(), X3DConcreteElement.findAncestorX3DObject()

    • hasNodeByDEF

      public boolean hasNodeByDEF​(java.lang.String DEFvalue)
      Recursive method to determine whether node with DEFvalue is found, meaning both objects are attached to same scene graph.
      Parameters:
      DEFvalue - is value of the name field being searched for in this element and child elements(if any)
      Returns:
      whether node is found
      See Also:
      findNodeByDEF(String)

    • validate

      public java.lang.String validate()
      Recursive method to validate this element plus all contained nodes and statements, using both datatype-specification value checks and regular expression (regex) checking of corresponding string values.
      Specified by:
      validate in class X3DConcreteElement
      Returns:
      validation results (if any)